Author Topic: Version .80 Temp/Hum Sensor  (Read 299 times)

0 Members and 1 Guest are viewing this topic.

Offline CW7491

  • Contributor
  • ***
  • Posts: 105
Version .80 Temp/Hum Sensor
« on: January 20, 2021, 01:21:10 AM »
Iíve been told the Rainwise units use Sensirion sensors like Davis for temperature and humidity, but I noticed on their website the photo for their version .80 sensor looks to use a bead thermistor for temperature. The humidity element does not appear to be in view. Does anyone have experience with these sensors?

 https://rainwise.com/relative-humidity-temperature-sensor

Offline YugEsiwNiar

  • Member
  • *
  • Posts: 3
Re: Version .80 Temp/Hum Sensor
« Reply #1 on: February 10, 2021, 01:06:16 PM »
The Sensirion sensor is on the other side of that board.

Offline CW7491

  • Contributor
  • ***
  • Posts: 105
Re: Version .80 Temp/Hum Sensor
« Reply #2 on: February 10, 2021, 07:50:54 PM »
Thanks for the reply. Iím not sure if you know, but is that a thermistor I see in addition to the Sensirion sensor? Do you know which Sensirion sensor?

Offline YugEsiwNiar

  • Member
  • *
  • Posts: 3
Re: Version .80 Temp/Hum Sensor
« Reply #3 on: February 11, 2021, 10:01:53 AM »
Needed to break out the magnifier for that one, looks like a sht-31 to me. 

Offline CW7491

  • Contributor
  • ***
  • Posts: 105
Re: Version .80 Temp/Hum Sensor
« Reply #4 on: February 11, 2021, 12:57:07 PM »
Thank you for looking. Interesting that they presumably use a thermistor for temperature instead of the Sensirion sensor.

Offline jgentry

  • Forecaster
  • *****
  • Posts: 518
Re: Version .80 Temp/Hum Sensor
« Reply #5 on: February 21, 2021, 05:01:10 PM »
Needed to break out the magnifier for that one, looks like a sht-31 to me.

The MK4 uses the SHT-35
« Last Edit: February 21, 2021, 05:05:56 PM by jgentry »
Davis Vantage Pro2. SHT-75. WU: KXALJEMI2 & KALTHORS2. CWOP/APRS: C6353 & E6358