Author Topic: Firmware 2.25 is ready to download  (Read 2990 times)

0 Members and 1 Guest are viewing this topic.

Offline WiFiLogger

  • Forecaster
  • *****
  • Posts: 539
Re: Firmware 2.25 is ready to download
« Reply #25 on: December 13, 2019, 02:46:17 AM »
Hi, I recently bought a Davis Vantage Vue with wifilogger. It is installed and sending data correctly to wl.com. However the record of the maxims is well delayed as print appendix. It is now 14:30 and the maximum does not update, displays the max from 11:08. Since I didn't update anything, I probably have firmware 1.xx. Has this been fixed in any firmware updates? As I have old firmware, how do I upgrade? [ You are not allowed to view attachments ]
HiLows are being exported every 3 minutes, instead of real time data which is exported every 1 min (can be adjusted).
Please log to your WiFiLogger go to SETUP|SYSTEM and check your version.
If it 1.xx version, then update  is very special.
If it is 2.xx update is simple. It is downloading new firmware by itself when you trigger it in SETUP|SYSTEM, or in very old 2.xx you have to open http://WFL_IP/update
Newest version is 2.26, but it has no big changes.
- Windy.com should work on user key now
- Italian language is added to update option.


Offline gvspfc

  • Member
  • *
  • Posts: 19
    • Blumenau/Brazil Wunderground
Re: Firmware 2.25 is ready to download
« Reply #26 on: December 13, 2019, 10:03:06 AM »
Hi, I recently bought a Davis Vantage Vue with wifilogger. It is installed and sending data correctly to wl.com. However the record of the maxims is well delayed as print appendix. It is now 14:30 and the maximum does not update, displays the max from 11:08. Since I didn't update anything, I probably have firmware 1.xx. Has this been fixed in any firmware updates? As I have old firmware, how do I upgrade? [ You are not allowed to view attachments ]
HiLows are being exported every 3 minutes, instead of real time data which is exported every 1 min (can be adjusted).
Please log to your WiFiLogger go to SETUP|SYSTEM and check your version.
If it 1.xx version, then update  is very special.
If it is 2.xx update is simple. It is downloading new firmware by itself when you trigger it in SETUP|SYSTEM, or in very old 2.xx you have to open http://WFL_IP/update
Newest version is 2.26, but it has no big changes.
- Windy.com should work on user key now
- Italian language is added to update option.

First of all, sorry about my english.

Hope it can be understood.

It is probably in a very old firmware version, as it is not exporting every 3 minutes as you can see in the image. Weekend I will check the version and post again here. Hope you can explain me how to update if it is on the 1.xx version.

Thank you so much for now

Offline MatteoPV

  • Senior Member
  • **
  • Posts: 89
Re: Firmware 2.25 is ready to download
« Reply #27 on: December 14, 2019, 11:33:42 AM »
Hi, I recently bought a Davis Vantage Vue with wifilogger. It is installed and sending data correctly to wl.com. However the record of the maxims is well delayed as print appendix. It is now 14:30 and the maximum does not update, displays the max from 11:08. Since I didn't update anything, I probably have firmware 1.xx. Has this been fixed in any firmware updates? As I have old firmware, how do I upgrade? [ You are not allowed to view attachments ]
HiLows are being exported every 3 minutes, instead of real time data which is exported every 1 min (can be adjusted).
Please log to your WiFiLogger go to SETUP|SYSTEM and check your version.
If it 1.xx version, then update  is very special.
If it is 2.xx update is simple. It is downloading new firmware by itself when you trigger it in SETUP|SYSTEM, or in very old 2.xx you have to open http://WFL_IP/update
Newest version is 2.26, but it has no big changes.
- Windy.com should work on user key now
- Italian language is added to update option.

I installed 2.26, I tried the translated version in Italian but I then went back to the English version. In the Italian one the word 'tramonto' overlaps with the sunset time, moreover in real time data it doesn't let me see the weather forecast anymore

Offline MatteoPV

  • Senior Member
  • **
  • Posts: 89
Re: Firmware 2.25 is ready to download
« Reply #28 on: December 14, 2019, 12:11:49 PM »
I noticed an anomalies that I had already reported to which I cannot give an answer. I connected my wifi logger to the modem using the wireless B standard which from the tests I did, gave me more power. Only with the 2.25 firmware, the modem told me that the wifi logger would have a weak signal strength, while with 2.26 it returned to being good.

Offline WiFiLogger

  • Forecaster
  • *****
  • Posts: 539
Re: Firmware 2.25 is ready to download
« Reply #29 on: December 19, 2019, 12:08:27 PM »
I noticed an anomalies that I had already reported to which I cannot give an answer. I connected my wifi logger to the modem using the wireless B standard which from the tests I did, gave me more power. Only with the 2.25 firmware, the modem told me that the wifi logger would have a weak signal strength, while with 2.26 it returned to being good.

I don't test WiFiLoggers on B, because usualy I don't have to use B, but libraries from producer of WiFi chip are changing very dynamically. I am using always the newest stable version.
I am testing WiFilogger after that, but I can't make all tests in short time.
So I could believe that 2.25 had some kind of malfunction in libraries, when in 2.26 new version repairs that.

Offline MatteoPV

  • Senior Member
  • **
  • Posts: 89
Re: Firmware 2.25 is ready to download
« Reply #30 on: December 19, 2019, 02:20:58 PM »
The best value of low RSSI I get with the wirelless protocol in B, so I use that, that's fine

Offline gvspfc

  • Member
  • *
  • Posts: 19
    • Blumenau/Brazil Wunderground
Re: Firmware 2.25 is ready to download
« Reply #31 on: January 09, 2020, 11:55:07 AM »
Hi, I recently bought a Davis Vantage Vue with wifilogger. It is installed and sending data correctly to wl.com. However the record of the maxims is well delayed as print appendix. It is now 14:30 and the maximum does not update, displays the max from 11:08. Since I didn't update anything, I probably have firmware 1.xx. Has this been fixed in any firmware updates? As I have old firmware, how do I upgrade? [ You are not allowed to view attachments ]
HiLows are being exported every 3 minutes, instead of real time data which is exported every 1 min (can be adjusted).
Please log to your WiFiLogger go to SETUP|SYSTEM and check your version.
If it 1.xx version, then update  is very special.
If it is 2.xx update is simple. It is downloading new firmware by itself when you trigger it in SETUP|SYSTEM, or in very old 2.xx you have to open http://WFL_IP/update
Newest version is 2.26, but it has no big changes.
- Windy.com should work on user key now
- Italian language is added to update option.

Ok, my version was 2.16. Easylly updated to 2.26 and the max´s correctly being exported do weatherlink.

Offline Harish

  • Member
  • *
  • Posts: 28
    • Chrompet AWS
Re: Firmware 2.25 is ready to download
« Reply #32 on: February 02, 2020, 01:24:30 PM »
Hi,

I have recently bought wifilogger 2.0 with firmware version 2.26 for my davis vantage vue console. It was working fine for 1 month.
And now it is not updating data to weatherlink/wunderground once in a while and I have to press white button to make it online again. Also Wunderground rapid update is failing and when i checked the debug log, it has "Connection to rtupdate.wunderground.com failed" logs appearing often. Below are the sample logs.

RapidFire
Connection to rtupdate.wunderground.com failed
Renew RTD
Renew HiLows
RapidFire
Connection to rtupdate.wunderground.com failed
Renew RTD
RapidFire
Client response time: 550
success

Is it an issue with Wunderground or with the wifilogger device? Also any idea why it should stop working once in a while and reset required? FYI.. I'm checking the debug log through web access "http://192.xx.xx.xx/debug".

Offline Herbaldew

  • Member
  • *
  • Posts: 35
Re: Firmware 2.25 is ready to download
« Reply #33 on: February 02, 2020, 04:35:58 PM »
I haven't noticed any outages, but I do check my interface page daily.  Maybe a week ago the WFL started to reboot nearly every time I tried to log in to it.  I am running v2.24.

When I read your post, I saw that you have the same error I was seeing in debug mode.  I have had rapid fire set to 5 seconds.  I changed that to 30 seconds and after around 10 tries the interface page has loaded normally.

Maybe something WU's end is to blame for both our problems?

Offline WiFiLogger

  • Forecaster
  • *****
  • Posts: 539
Re: Firmware 2.25 is ready to download
« Reply #34 on: February 02, 2020, 05:37:45 PM »
I haven't noticed any outages, but I do check my interface page daily.  Maybe a week ago the WFL started to reboot nearly every time I tried to log in to it.  I am running v2.24.

When I read your post, I saw that you have the same error I was seeing in debug mode.  I have had rapid fire set to 5 seconds.  I changed that to 30 seconds and after around 10 tries the interface page has loaded normally.

Maybe something WU's end is to blame for both our problems?
Debug in version v2.24 was causing some problems. With v2.26 it is working much better. No issue with debug.

Offline WiFiLogger

  • Forecaster
  • *****
  • Posts: 539
Re: Firmware 2.25 is ready to download
« Reply #35 on: February 02, 2020, 05:46:07 PM »
I have recently bought wifilogger 2.0 with firmware version 2.26 for my davis vantage vue console. It was working fine for 1 month.
And now it is not updating data to weatherlink/wunderground once in a while and I have to press white button to make it online again. Also Wunderground rapid update is failing and when i checked the debug log, it has "Connection to rtupdate.wunderground.com failed" logs appearing often. Below are the sample logs.

RapidFire
Connection to rtupdate.wunderground.com failed
Renew RTD
Renew HiLows
RapidFire
Connection to rtupdate.wunderground.com failed
Renew RTD
RapidFire
Client response time: 550
success

Is it an issue with Wunderground or with the wifilogger device? Also any idea why it should stop working once in a while and reset required? FYI.. I'm checking the debug log through web access "http://192.xx.xx.xx/debug".

I have seen the same. It is not WiFiLogger problem, but WeatherUnderground problem.
I remember that when WiFiLogger1 was released. There was a problem with CWOP.
cwop.aprs.net is an address to 7 different servers. 3 serves were rejecting data, so data was recorded in same patter as RapidFire now.
5 goes ok, then 1 not, then 2 ok, then 7 not.
I would like to wait some while, then start looking any issue. Server address is the same in any other software, like WeatherLink.com etc.

For rebooting:
Please turn on STAY ALIVE function in SETUP -> SYSTEM.
Stay Alive: Router & Google.
It will check Internet connection every 1 min to router and every 60 min. to Google server. Reconnect or/and reboot itself  if needed it.
I will turn this option as default with new firmware.

Offline Herbaldew

  • Member
  • *
  • Posts: 35
Re: Firmware 2.25 is ready to download
« Reply #36 on: February 02, 2020, 07:06:01 PM »
I haven't noticed any outages, but I do check my interface page daily.  Maybe a week ago the WFL started to reboot nearly every time I tried to log in to it.  I am running v2.24.

When I read your post, I saw that you have the same error I was seeing in debug mode.  I have had rapid fire set to 5 seconds.  I changed that to 30 seconds and after around 10 tries the interface page has loaded normally.

Maybe something WU's end is to blame for both our problems?
Debug in version v2.24 was causing some problems. With v2.26 it is working much better. No issue with debug.

Debug isn't the problem - was just using it after the spontaneous reboot upon trying to access the interface page.  So far, still flawless with rapid fire backed off from 5 seconds.

Offline Harish

  • Member
  • *
  • Posts: 28
    • Chrompet AWS
Re: Firmware 2.25 is ready to download
« Reply #37 on: February 03, 2020, 11:13:13 AM »
I have recently bought wifilogger 2.0 with firmware version 2.26 for my davis vantage vue console. It was working fine for 1 month.
And now it is not updating data to weatherlink/wunderground once in a while and I have to press white button to make it online again. Also Wunderground rapid update is failing and when i checked the debug log, it has "Connection to rtupdate.wunderground.com failed" logs appearing often. Below are the sample logs.

RapidFire
Connection to rtupdate.wunderground.com failed
Renew RTD
Renew HiLows
RapidFire
Connection to rtupdate.wunderground.com failed
Renew RTD
RapidFire
Client response time: 550
success

Is it an issue with Wunderground or with the wifilogger device? Also any idea why it should stop working once in a while and reset required? FYI.. I'm checking the debug log through web access "http://192.xx.xx.xx/debug".

I have seen the same. It is not WiFiLogger problem, but WeatherUnderground problem.
I remember that when WiFiLogger1 was released. There was a problem with CWOP.
cwop.aprs.net is an address to 7 different servers. 3 serves were rejecting data, so data was recorded in same patter as RapidFire now.
5 goes ok, then 1 not, then 2 ok, then 7 not.
I would like to wait some while, then start looking any issue. Server address is the same in any other software, like WeatherLink.com etc.

For rebooting:
Please turn on STAY ALIVE function in SETUP -> SYSTEM.
Stay Alive: Router & Google.
It will check Internet connection every 1 min to router and every 60 min. to Google server. Reconnect or/and reboot itself  if needed it.
I will turn this option as default with new firmware.

Thanks. Will monitor sometime for Wunderground issue. Also kept the "Stay Alive" option. Will monitor frequent disconnection issue as well.

Offline MatteoPV

  • Senior Member
  • **
  • Posts: 89
Re: Firmware 2.25 is ready to download
« Reply #38 on: February 05, 2020, 02:02:11 PM »
I use the 'stay alive' feature and with firmware 2.26 I'm doing great. Very reliable

 

anything