Author Topic: connecting Davis 6163 to meteobridge standard and weather link 6100  (Read 245 times)

0 Members and 1 Guest are viewing this topic.

Offline craigstafford

  • Member
  • *
  • Posts: 2
Got my weather station components in and I'm having problems with connecting the meteobridge standard to Davis Console. The only port on the console is for a data logger and the diagram shows a usb connection. Ive setup the ISS and its communicating with the console. I'm stymied as to how to proceed. Thanks for any and all help

Offline galfert

  • Global Moderator
  • Forecaster
  • *****
  • Posts: 5685
Re: connecting Davis 6163 to meteobridge standard and weather link 6100
« Reply #1 on: August 17, 2019, 12:15:51 PM »
The Meteobridge supports the Weatherlink 6100 via the network. There is no need for USB connection. The USB connection if for those that have a USB data logger on connected to the back of the console.

Just go to the Weather Station tab on the Meteobridge and select Davis Weather Link Live and fill it in with your WeatherLink Live's IP address and select ISS...

 [ You are not allowed to view attachments ]

Basically in your case the Meteobridge will not be getting data from the display console. Instead the Meteobridge will be getting its data from the WeatherLink Live.
« Last Edit: August 17, 2019, 12:18:10 PM by galfert »
Ecowitt GW1000 | Meteobridge (WeatherBridge)
WU: KFLWINTE111  |  PWSweather: KFLWINTE111
CWOP: FW3708  |  AWEKAS: 14814
Windy: pws-f075acbe
Weather Underground Issue Tracking