WXforum.net

Weather Station Hardware => Davis Instruments Weather Stations => Topic started by: Phil23 on August 19, 2019, 05:00:42 PM

Title: Console Temp Display.
Post by: Phil23 on August 19, 2019, 05:00:42 PM

Just noticed it this thread https://www.wxforum.net/index.php?topic=37663.0 the VP console is displaying temp with a decimal point.

Mine only displays whole degrees, no point something...

Is that something they have revised with newer firmware?

Mines on the 3.15 it shipped with back in late 2016.

Title: Re: Console Temp Display.
Post by: CW2274 on August 19, 2019, 05:15:20 PM

It's easily changed on the console. Select "temp", then select "2ND", then "units", then scroll through until the decimal is displayed. It will scroll through Celsius as well.

Title: Re: Console Temp Display.
Post by: CW2274 on August 19, 2019, 05:39:38 PM

My apologies, I thought you were in the States, I should have said "scroll through Fahrenheit as well". #-o

Title: Re: Console Temp Display.
Post by: Phil23 on August 19, 2019, 07:12:43 PM

Quote from: CW2274 on August 19, 2019, 05:15:20 PM

Select "temp", then select "2ND", then "units", then scroll through until the decimal is displayed.

Thanks Heaps,

That's been annoying me since day dot on my VP

Guess I should be giving myself a RTFM kick in the but.


Cheers.

Title: Re: Console Temp Display.
Post by: CW2274 on August 19, 2019, 07:27:22 PM

Quote from: Phil23 on August 19, 2019, 07:12:43 PM

Quote from: CW2274 on August 19, 2019, 05:15:20 PM

Select "temp", then select "2ND", then "units", then scroll through until the decimal is displayed.

Guess I should be giving myself a RTFM kick in the but.

You're right and you're certainly not alone. :-P