WXforum.net

Weather Station Hardware => Davis Instruments Weather Stations => Topic started by: 71sbeetle on September 08, 2008, 11:32:58 AM

Title: Installed Davis VP2+ 6163 on August 18th 2008 and ....
Post by: 71sbeetle on September 08, 2008, 11:32:58 AM
The ISS stopped transmitting this morning (September 08th 2008) and after a couple of calls to Davis, it was determined that the ISS board (built in April of 2008) is officially dead ! But the good news is a brand new one is on the way to me as we speak ! Although I wish the board wouldn't have died in the first place, I have to say that the Davis customer service is TOP NOTCH !!! I am glad I spent the extra $$$ to get the VP2+ :)
Title: Re: Installed Davis VP2+ 6163 on August 18th 2008 and ....
Post by: 71sbeetle on September 14, 2008, 09:25:11 PM
new one should arrive tomorrow yay
Title: Re: Installed Davis VP2+ 6163 on August 18th 2008 and ....
Post by: JOE on September 17, 2008, 05:57:37 PM
Any idea what happened to it?
Title: Re: Installed Davis VP2+ 6163 on August 18th 2008 and ....
Post by: 71sbeetle on September 18, 2008, 11:02:44 AM
no clue, I sent the defective SIM back to them so they can find out but I doubt I will never find out from them what it was.
Title: Re: Installed Davis VP2+ 6163 on August 18th 2008 and ....
Post by: mchallis on September 25, 2008, 01:37:20 AM
I have a 6163 also.
My temp/hum sensor went out at 8 months. They sent me another one and trusted me to return the old one within 10 days. They have good customer service.

Here is a manual on how it comes apart.
http://www.davisnet.com/product_documents/weather/manuals/VP2_Fan_Aspirated_ISS_Rev_C.pdf
Title: Re: Installed Davis VP2+ 6163 on August 18th 2008 and ....
Post by: 71sbeetle on September 25, 2008, 08:01:37 AM
they also have a video on their website that shows you how it comes apart :)
Title: Re: Installed Davis VP2+ 6163 on August 18th 2008 and ....
Post by: mchallis on September 25, 2008, 11:44:59 AM
they also have a video on their website that shows you how it comes apart :)

Did they finally fix the link to the video? Last spring, when I had this problem the video was 404 not found.
Title: Re: Installed Davis VP2+ 6163 on August 18th 2008 and ....
Post by: 71sbeetle on September 25, 2008, 11:51:00 AM
both videos work for me :)
Title: Re: Installed Davis VP2+ 6163 on August 18th 2008 and ....
Post by: EdinFla on October 01, 2008, 10:19:31 PM
Good Luck 71.

See my other posts a few minutes ago on repeated failures, till now, out of warranty, tough luck!

I also thought spending $$$$ on the top shelf DAVIS was a safe bet.  I guess I didn't read the fine print on the annual maint cost(s), ie: replacing the sensors, etc. every 6 - 7 months.

In coastal florida, but not beach front.


Ed