Author Topic: Data out of Range 10x ?  (Read 333 times)

0 Members and 1 Guest are viewing this topic.

Offline DoctorKnow

  • Forecaster
  • *****
  • Posts: 2002
Data out of Range 10x ?
« on: June 27, 2024, 09:07:27 AM »
Doc or someone who knows... What can be causing this? Is it calibrations on the display? They are not way out of whack that I can tell.
Code: [Select]
logger (25.06.2024 11:48:17): Bad wind0 sensor data, "gust speed x10" (1236) out of range [0:900]
logger (25.06.2024 11:59:16): message above repeats 16 times.
logger (25.06.2024 12:00:00): Bad thb0 sensor data, "pressure x10" (1393) out of range [4000:13000]
logger (25.06.2024 12:11:37): message above repeats 17 times.

Offline docbee

  • Moderator
  • Forecaster
  • *****
  • Posts: 860
    • smartbedded
Re: Data out of Range 10x ?
« Reply #1 on: July 09, 2024, 06:48:07 PM »
Which weather station is sending this rejected data?
founder of smartbedded.com - home of meteohub, meteoplug, meteobridge, meteostick

Offline DoctorKnow

  • Forecaster
  • *****
  • Posts: 2002
Re: Data out of Range 10x ?
« Reply #2 on: July 11, 2024, 01:41:16 PM »
It's the WH2350 or WH2320 which is really a Tycon Power TP3000WC. I also have an ecowitt GW1100 reporting temperature, but that isn't showing anything wrong that I can tell.

HEre is the latest --logger (08.07.2024 07:24:53): Bad thb0 sensor data, "pressure x10" (-5023) out of range [4000:13000]
logger (08.07.2024 07:25:24): message above repeats 4 times.
logger (10.07.2024 00:00:06): Bad wind0 sensor data, "gust speed x10" (1622) out of range [0:900]
logger (10.07.2024 00:11:05): message above repeats 16 times.
logger (10.07.2024 00:11:48): Bad thb0 sensor data, "temperature x10" (5636) out of range [-500:2000]
logger (10.07.2024 00:23:26): message above repeats 17 times.

Offline DoctorKnow

  • Forecaster
  • *****
  • Posts: 2002
Re: Data out of Range 10x ?
« Reply #3 on: July 13, 2024, 10:20:23 AM »
Doc, I think I figured out the error. The Dew Point calculation was off, and I also added a Dew Point sensor from the list to use with a separate thermo/hygro from the all in one sensor. Since making the change of calibration in the GW1100 temperature option, and doing it through meteobridge, everything is acting normal.