Author Topic: Re-install w/newer version on new computer  (Read 1192 times)

0 Members and 1 Guest are viewing this topic.

Offline sreilly

  • Member
  • *
  • Posts: 8
    • Astral-Imaging
Re-install w/newer version on new computer
« on: September 11, 2009, 11:35:17 PM »
I have data dating back to 2005. I took VWS off my home office computer and installed VWS on my Observatory  computer. The office had an older version of VWS and I upload data to my astronomy imaging website http://www.astral-imaging.com every 30 minutes. After installing the latest VWS version on the observatory computer I copied over the data and some other files from the office computer.

Problem is that the data being sent to the website isn't all updated as should be. The weather data on the left column is old and I'm not sure which file is not updating properly. I really need to redo the whole weather section as it isn't anything special to speak of. Any suggestions on which file is not updating? Any links for customizing a nice weather page?

Thanks,

Steve

Offline Anthony

  • Moderator
  • Forecaster
  • *****
  • Posts: 1707
    • Anthony's Weather
Re: Re-install w/newer version on new computer
« Reply #1 on: September 12, 2009, 08:50:25 AM »
Under Settings | HTML Settings make sure that all of the htx files on the left are being phrased into HTML files on the left. Make sure there is a check mark beside of each file that you want phrased. Also make sure you have enabled a schedule.

Next under Settings | Upload File or Upload Folder Send, which ever one you are using. That you have enabled a schedule there.

Hope this helps.



Thanks,
Anthony
WB8YUE