Author Topic: gw1000 different frequency  (Read 423 times)

0 Members and 1 Guest are viewing this topic.

Offline mgma

  • Member
  • *
  • Posts: 23
gw1000 different frequency
« on: April 10, 2021, 04:44:04 PM »
Is it possible the gw 1000 gateway with 433mhz work with 868mhz wh32 sensor or it does not matter and if not is there a way to make it work



Offline Rover1822

  • Forecaster
  • *****
  • Posts: 1974
    • Mini Wind and Solar Data project
Re: gw1000 different frequency
« Reply #1 on: April 10, 2021, 06:18:50 PM »
As far as I know, NO

The frequencies that are in the sensors can't be changed to a different frequency.

Ambient:
  WS-2000
  PM 2.5(2)
  WH31B(2)
  WH40E
  WH31P
EcoWitt:
  GW1100
  GW1000(4)
  WH31(2)
  WH57
  WH51(12),
  WH40
  WH5360B
  WN34S
  WittBoy WS90 + GW2000
  WS90 (other one) + GW1100
Personal Sites: Weather Cam

Offline Gyvate

  • Forecaster
  • *****
  • Posts: 3263
Re: gw1000 different frequency
« Reply #2 on: April 11, 2021, 09:07:54 AM »
Neither can the frequency on which the console receives be changed ! (normally, in a simple manner, for a layperson - technically of course almost everything can be done).

I don't know where exactly you are coming from ... meaning, if your main equipment is 868 MHz based and you ran somehow into a Misol-branded GW1000 (where our matrix clearly states that it is 433 MHz only), or you have mainly 433 MHz equipment and ran into a 868MHz WH32 sensor.

They cannot be simply changed to a different frequency - sending or receiving. The effort involved if you wanted to modify the hardware (plus the expertise needed) would be most likely far beyond getting a new piece of the other frequency (depending on your scenario), given the price of a GW1000 (36 USD) or of a WH32 (15 USD) if you get them from Ecowitt for your desired frequency.
WS2350 1.6.6, GW1000(3) 1.7.7,WH2650 WiFi (2) 1.7.7 (test/backup), GW1100 2.3.1, GW2000(3) 3.1.1, HP2551 1.9.3,5.1.5;HP3500 1.7.2,WS3800 1.2.8, WN1910 1.2.3,WN1980 1.2.3;
Ecowitt WS90(2)1.3.5/1.4.0, WS80(2)1.2.5, WS68, WS69, WH40, WH31, WH31-EP, WN30, WN34L, WN35, WH32, WH32-EP, WH32B, WH57 [Lightning], WH41 [PM2.5], WH51, WH45, WH55
MeteobridgePro(2)[test,prod] 5.8 Mar 01 2024, 15185 - Blake-Larsen Sun Recorder - RPi4/weewx 4.8.0/4.10.2/CumulusMX 3282/Meteobridge RPi4B-2GB(3169)
Barani Meteoshield Pro, MetSpec Rad02 - Ecowitt 5763,34418;WU ISAARB3(WH4000SE),ISAARB22(HP2553), http://meshka.eu

Offline mgma

  • Member
  • *
  • Posts: 23
Re: gw1000 different frequency
« Reply #3 on: April 11, 2021, 11:55:19 AM »
I bought the (gw1000) from (ali express) in a hurry without looking to frequency i thought it will work with all sensor with the same type ,,anyway thanks i will use it for another sensor i  will buy it (Lightning sensor) with 433 mhz 

 

anything