I recently got a Rainwise Mark III LR unit with console from an estate sale.
I already have one up and running with several Oracle displays scattered around (much to my wife's annoyance, but hey when you need a wind speed or temperature, what better way?)
When I brought this one into the house and flipped it on, the Oracles went nuts, and I immediately figured out both the stations were set to the same code.
I went to the Rainwise web page and found a nice colorful manual for setting up the station, and on page 9, secdtion 5.12 for the LR station it gives directions for changing the code of the station. It's supposed to be in the upper left corner of the motherboard. I've seen plenty of DIP switches in my life, but for the life of me cannot find it on this board. Unfortuntely despite all the other pictures, there is only a drawing of a generic DIP switch with no hint of where on the board to look.
I've attached a photo of the board, and while I have another LR station, its up on a roof and relatively inaccessible right now, so I can't pop the top and see if the motherboards are the same.
The board number is 10230304, if that is of any help. I guess it is possible they realized with the increased range of these transmitters that there was overlap and interference and added the DIP channel selection on a revised board.
Anyone have experience or know answers to some of my questions?
Thanks. Dale
[ You are not allowed to view attachments ]