Weather Station Hardware > Ambient Weather and Ecowitt and other Fine Offset clones

Ambient WS2090 & Weather Underground Troubleshooting

(1/3) > >>

flash43:
- Hey, everyone! I'm new to the wxforum. So I registered my weather station on Wunderground, downloaded the latest edition of Cumulus...and I still can't get data to reflect to Cumulus/activate my station on Wunderground. Station ID/password have been input correctly into Cumulus and my clocks are synced...plus I've followed each step in online manuals I've been able to find...so if anyone out there can help, that would sure be appreciated! I know most probably has a 2080, but if anyone has used a 2090 and can help, that's be wonderful. My station ID (in case this helps) is: KTNNASH46.

SlowModem:
Welcome to the forum!  :)

Ensure your WU ID entered into cumulus is all caps  KTNNASH46.  WU is very picky about that.

Remember that it's a holiday weekend, and if something at WU need to be done manually, it will probably be Tuesday.

Good Luck!  :)

DanS:
Maybe something in here will help to narrow it down. Do you have the "Fine Offset" choice selected as station type? Since you say " I still can't get data to reflect to Cumulus " I'm assuming your console data isn't getting into Cumulus, not alone getting through and out to Wunderground.
Hope you get it.

PaulMy:
Entering KTNNASH46 in WU gives
--- Quote ---There has been an error!

City Not Found

We're sorry, but the page you have requested was not found.

The search for "KTNNASH46" did not return results.

--- End quote ---

I would have thought if KTNNASH46 was correctly set up/registered that it would show but without any data.

Are you able to get any data to show in the Cumulus console?

Paul

flash43:

--- Quote from: DanS on May 27, 2013, 12:40:42 AM ---Maybe something in here will help to narrow it down. Do you have the "Fine Offset" choice selected as station type? Since you say " I still can't get data to reflect to Cumulus " I'm assuming your console data isn't getting into Cumulus, not alone getting through and out to Wunderground.
Hope you get it.

--- End quote ---

Yes, I set the station type to "Fine Offset", so I'm sure the problem falls into the "console data" category. I'll holla on this thread once I get it up :-)

Navigation

[0] Message Index

[#] Next page