Author Topic: VP2 remounting  (Read 1568 times)

0 Members and 1 Guest are viewing this topic.

Offline vinceskahan

  • Senior Member
  • **
  • Posts: 67
    • home site
VP2 remounting
« on: February 06, 2018, 09:30:03 PM »
Remounted my jan-2009 VP2 (notice the bent 2" PVC after 9 years) on a 20' Harbor Freight extendable flagpole.  Anemometer is at approximately 18 feet now which is making a big difference.   Pole is actually plumb and VP2 is level, and the wires are 40' or more away, so don't let the camera angle and telephoto effect throw you off. Total price, under $55 mounted.  Not bad.

WeeWX sites:
  Davis VP2+DFARS to a Seagate Dockstar (pogoplug)
  EcoWitt GW1000, WH32 outdoor T+H, multiple WH31 indoor T+H, WH51 soilMoisture (pi3)
Home site:
Wunderground: KWAFEDER15
PWS:                KWFEDER15
CWOP:             CW6881

Offline benay ra'am

  • Senior Contributor
  • ****
  • Posts: 184
Re: VP2 remounting
« Reply #1 on: February 08, 2018, 07:16:58 PM »
What a big difference that's going to make, 18 foot is a lot better than you had before, good job!...........................
« Last Edit: February 08, 2018, 07:18:41 PM by benay ra'am »

CoCoRaHS: NC-JH-80

Offline Intheswamp

  • Early on one frosty morn'...
  • Forecaster
  • *****
  • Posts: 1482
  • Sure...I know enough to be dangerous, now.
    • Beeweather
Re: VP2 remounting
« Reply #2 on: February 08, 2018, 10:42:25 PM »
Yep, it will definitely improve things!!!  I would imagine those solid fences were wreaking havoc on the anemometer...wind hitting them and being redirected.  Good move!!!!


Davis VP2, v3.12
Cumulus v1.9.4  Build 1079
Today's weather beats no weather at all!
Nope, I still haven't replaced that humidity sensor... DONE!<grin>