yes, the SD card is in the case somewhere , but that was later in the day , around that time i did take the sensor down and worked on the poles , they interlock and i wanted to bolt them together
that was about 11:45 to 12:45 ish BST
Then i copied the files from a backup over at 14:00 BST created time on the laptop , so it would have been about 14:00 to 14:10 ish i put the SD card back into the machine and it went between the slot and case into the machine.
On the console the history skips a beat, set to 5 min intervals
12:16, 12:21, 12:26, 12:31 , 12:40, 12:45 , 12:50 etc
The unit is set to send at 5min intervals and customised at 300 seconds
Its coming back to me now -
I remember pulling the plug on the device for a minute possibly around that time.
i wanted to edit the mis-reported rain, wind direction, and I thought i could do that in the history and actually change the numbers themselves
I know one of the options in the history, is about going to a page number YES/CANCEL , I cannot get out of that , as the options disappear and I have to pull the plug
so that was probably what I did , pulled the power at that moment in time, hence the gap in time on the device - but i dont think it reported to the weathersites previously , have to investigate further and see gaps on the spreadsheet