I just skimmed through the instruction manual and I didn't see anything in it about a browser interface or setting the logger to have a static IP address. I would imagine that all the IP loggers should have this feature, but I'm not certain of course... I used Internet Explorer and entered my loggers current IP address as show from the WeatherLink software just like this "10.0.1.11" without quotation marks and pressed enter. The page took a few seconds to load and loaded like it was a dial up connection; it loaded slowly only a few boxes at a time. One thing to keep in mind is that you need to close or suspend communications with any and all programs that the logger is talking to. If not, the browser won't be able to find the logger since it is busy and can only do communicate with one entity at a time.