« previous next »
Pages: [1]   Go Down

Author Topic: HP2551 console & WN32CP unit  (Read 231 times)

0 Members and 1 Guest are viewing this topic.

Offline Rocketman

  • Senior Contributor
  • ****
  • Posts: 188
HP2551 console & WN32CP unit
« on: February 06, 2023, 08:17:58 PM »
Currently my HP2551 console gets a pressure reading from WN32CP unit .
Can I get the reading for barometer from the GW1100 unit ?
Logged
HP2550 console 1.9.3 , WS80 1.2.4 , WH57 lightning sensor , WH40 rain gauge , WH51 soil moisture sensor , GW1100 gateway 2.3.0

Offline Gyvate

  • Forecaster
  • *****
  • Posts: 3329
Re: HP2551 console & WN32CP unit
« Reply #1 on: February 07, 2023, 08:00:17 AM »
this depends on your scenario:
- with a GW1100 you can get its pressure readings  ;)
- on a HP25x0 display you can't get the readings from the GW1100 pressure chip
when you want to get (+/-) its readings on the HP25x0 console, you can place your WH32B close to the GW1100 location 8-)
- with a GW1100 you can get the readings of the WH32B (WH32 indoor) though - when you remove (cut/unsolder) the T/H sensor wires of the GW1100
Logged
WS2350 1.6.7, GW1000(3) 1.7.7,WH2650 WiFi (2) 1.7.7 (test/backup), GW1100 2.3.1, GW2000(3) 3.1.1, HP2551 1.9.5,5.1.5;HP3500 1.7.2,WS3800 1.2.8, WN1910 1.2.3,WN1980 1.2.3;
Ecowitt WS90(2)1.3.5/1.4.0, WS80(2)1.2.5, WS68, WS69, WH40, WH31, WH31-EP, WN30, WN34L, WN35, WH32, WH32-EP, WH32B, WH57 [Lightning], WH41 [PM2.5], WH51, WH45, WH55
MeteobridgePro(2)[test,prod] 5.8 Mar 01 2024, 15185 - Blake-Larsen Sun Recorder - RPi4/weewx 4.8.0/4.10.2/CumulusMX 3283/Meteobridge RPi4B-2GB(3169)
Barani Meteoshield Pro, MetSpec Rad02 - Ecowitt 5763,34418;WU ISAARB3(WH4000SE),ISAARB22(HP2553), http://meshka.eu
Pages: [1]   Go Up
« previous next »
 

anything