Author Topic: Device firmware 1.7.8 for HP2551 console released  (Read 1313 times)

0 Members and 1 Guest are viewing this topic.

Offline Gyvate

  • Forecaster
  • *****
  • Posts: 3298
Device firmware 1.7.8 for HP2551 console released
« on: March 10, 2022, 01:19:35 PM »

change log
1. Italian, Spanish, Dutch language added.

2. Icon for weather serives of WC, WOW and ecowitt added when these services are enabled.

3. New WS90 sensor supported.

4. Max/Min font color changed.

5. Optimized sensor ID page for better logic.

6. Haptic rain data will be stored in flash upon priority selection.

7. Haptic rain gain can be set for different rain intensity.

8. German translation updated for better layout.

9. Tighter new sensor validation check when new sensor type is found. This is helpful in avoid wrong sensor data being recieved.

10. If haptic and tip spoon type rain sensor both present, user can select which data should be used at "more" page.

11. Fixed a bug for pm2.5 sensor not locked for its sensor ID.

12. Special character supported at the key board layout.
WS2350 1.6.7, GW1000(3) 1.7.7,WH2650 WiFi (2) 1.7.7 (test/backup), GW1100 2.3.1, GW2000(3) 3.1.1, HP2551 1.9.5,5.1.5;HP3500 1.7.2,WS3800 1.2.8, WN1910 1.2.3,WN1980 1.2.3;
Ecowitt WS90(2)1.3.5/1.4.0, WS80(2)1.2.5, WS68, WS69, WH40, WH31, WH31-EP, WN30, WN34L, WN35, WH32, WH32-EP, WH32B, WH57 [Lightning], WH41 [PM2.5], WH51, WH45, WH55
MeteobridgePro(2)[test,prod] 5.8 Mar 01 2024, 15185 - Blake-Larsen Sun Recorder - RPi4/weewx 4.8.0/4.10.2/CumulusMX 3283/Meteobridge RPi4B-2GB(3169)
Barani Meteoshield Pro, MetSpec Rad02 - Ecowitt 5763,34418;WU ISAARB3(WH4000SE),ISAARB22(HP2553), http://meshka.eu

Offline hiljo

  • Senior Contributor
  • ****
  • Posts: 257
    • Weerstation Hattem
Re: Device firmware 1.7.8 for HP2551 console released
« Reply #1 on: March 10, 2022, 01:24:14 PM »
This time no thanks in the changelog for the translators from Ecowitt  ;)
Dutch was done by me, so if there are any improvements, please let me know.
« Last Edit: March 10, 2022, 01:41:27 PM by hiljolodewijk »
Ecowitt HP2550C v1.9.3
2x GW2000 v3.1.1
WittBoy WS90 v1.3.8
Smart Sensors (WFC01 & AC1100) beta tester
3x WH31, WH32, WH40, WH41, WH57
WN34L, 2x WH51, WN35, WN34D

Dutch translator for Ecowitt.

https://www.weerstationhattem.nl/
  |
  |
  |
  | 
  |
  |
  |

Offline hiljo

  • Senior Contributor
  • ****
  • Posts: 257
    • Weerstation Hattem
Re: Device firmware 1.7.8 for HP2551 console released
« Reply #2 on: March 10, 2022, 02:16:21 PM »
I do not receive any data from the custom upload anymore! #-o It is not sending data at all..
Anyone else having this problem too?
Ecowitt HP2550C v1.9.3
2x GW2000 v3.1.1
WittBoy WS90 v1.3.8
Smart Sensors (WFC01 & AC1100) beta tester
3x WH31, WH32, WH40, WH41, WH57
WN34L, 2x WH51, WN35, WN34D

Dutch translator for Ecowitt.

https://www.weerstationhattem.nl/
  |
  |
  |
  | 
  |
  |
  |

Offline Gyvate

  • Forecaster
  • *****
  • Posts: 3298
Re: Device firmware 1.7.8 for HP2551 console released
« Reply #3 on: March 10, 2022, 04:47:40 PM »
it would be helpful if you were more specific ...
How do you know that your console is not sending/posting ?
How did you verify that ?
By some program seemingly not receiving data ?
If so, this only proves that your program does not receive or doesn't not process (or both) the data from the console not at all/properly etc.
So, could you please describe exactly your scenario  !? Then we can look into it.  8-)

Why do I say that ? Because in my scenario, data is sent properly by the custom server of the HP2551 console, it is received and processed properly. And all that with device firmware 1.7.8
« Last Edit: March 10, 2022, 05:02:20 PM by Gyvate »
WS2350 1.6.7, GW1000(3) 1.7.7,WH2650 WiFi (2) 1.7.7 (test/backup), GW1100 2.3.1, GW2000(3) 3.1.1, HP2551 1.9.5,5.1.5;HP3500 1.7.2,WS3800 1.2.8, WN1910 1.2.3,WN1980 1.2.3;
Ecowitt WS90(2)1.3.5/1.4.0, WS80(2)1.2.5, WS68, WS69, WH40, WH31, WH31-EP, WN30, WN34L, WN35, WH32, WH32-EP, WH32B, WH57 [Lightning], WH41 [PM2.5], WH51, WH45, WH55
MeteobridgePro(2)[test,prod] 5.8 Mar 01 2024, 15185 - Blake-Larsen Sun Recorder - RPi4/weewx 4.8.0/4.10.2/CumulusMX 3283/Meteobridge RPi4B-2GB(3169)
Barani Meteoshield Pro, MetSpec Rad02 - Ecowitt 5763,34418;WU ISAARB3(WH4000SE),ISAARB22(HP2553), http://meshka.eu

Offline hiljo

  • Senior Contributor
  • ****
  • Posts: 257
    • Weerstation Hattem
Re: Device firmware 1.7.8 for HP2551 console released
« Reply #4 on: March 10, 2022, 05:19:42 PM »
Good questions Gyvate.

I checked (set my device to Dutch translation? Maybe that's the problem?)
The URL given in the custom upload isn't requested at all (I checked my Apache access logs, but no request was made, no data was sent, URL wasn't even queried).
I tried different domains, even on different servers and different paths, none of them received a request from the weatherstation. I do have WiFi access, and uploading to ecowitt.net works, but custom upload not :?:
Ecowitt HP2550C v1.9.3
2x GW2000 v3.1.1
WittBoy WS90 v1.3.8
Smart Sensors (WFC01 & AC1100) beta tester
3x WH31, WH32, WH40, WH41, WH57
WN34L, 2x WH51, WN35, WN34D

Dutch translator for Ecowitt.

https://www.weerstationhattem.nl/
  |
  |
  |
  | 
  |
  |
  |

Offline Gyvate

  • Forecaster
  • *****
  • Posts: 3298
Re: Device firmware 1.7.8 for HP2551 console released
« Reply #5 on: March 10, 2022, 05:24:13 PM »
can you try @olicat's EAR service ?
see https://www.wxforum.net/index.php?topic=43041
if you think that the Dutch translation might cause an issue, can you (after having tried the EAR service) switch to English language and check if there are changes ...

Can you check your custom server data with WS View (Plus)
- there must NOT be any http:// etc. in front of the URL/domain name
https://www.weerstationmarsdijk.nl/ is WRONG - it has to be www.weerstationmarsdijk.nl only
- there must at least be "/" in the path field
« Last Edit: March 10, 2022, 05:34:35 PM by Gyvate »
WS2350 1.6.7, GW1000(3) 1.7.7,WH2650 WiFi (2) 1.7.7 (test/backup), GW1100 2.3.1, GW2000(3) 3.1.1, HP2551 1.9.5,5.1.5;HP3500 1.7.2,WS3800 1.2.8, WN1910 1.2.3,WN1980 1.2.3;
Ecowitt WS90(2)1.3.5/1.4.0, WS80(2)1.2.5, WS68, WS69, WH40, WH31, WH31-EP, WN30, WN34L, WN35, WH32, WH32-EP, WH32B, WH57 [Lightning], WH41 [PM2.5], WH51, WH45, WH55
MeteobridgePro(2)[test,prod] 5.8 Mar 01 2024, 15185 - Blake-Larsen Sun Recorder - RPi4/weewx 4.8.0/4.10.2/CumulusMX 3283/Meteobridge RPi4B-2GB(3169)
Barani Meteoshield Pro, MetSpec Rad02 - Ecowitt 5763,34418;WU ISAARB3(WH4000SE),ISAARB22(HP2553), http://meshka.eu

Offline hiljo

  • Senior Contributor
  • ****
  • Posts: 257
    • Weerstation Hattem
Re: Device firmware 1.7.8 for HP2551 console released
« Reply #6 on: March 10, 2022, 05:34:58 PM »
I did, also no records showing on EAR too :???:
Restarted the device to a few times, not helping.

Changed it back to English language, restarted, but also no requests are made to EAR, nor my websites.. Really strange...  :roll:
Ecowitt HP2550C v1.9.3
2x GW2000 v3.1.1
WittBoy WS90 v1.3.8
Smart Sensors (WFC01 & AC1100) beta tester
3x WH31, WH32, WH40, WH41, WH57
WN34L, 2x WH51, WN35, WN34D

Dutch translator for Ecowitt.

https://www.weerstationhattem.nl/
  |
  |
  |
  | 
  |
  |
  |

Offline Gyvate

  • Forecaster
  • *****
  • Posts: 3298
Re: Device firmware 1.7.8 for HP2551 console released
« Reply #7 on: March 10, 2022, 05:36:07 PM »
did you check my edit points in the earlier post ? (you may have missed them)
WS2350 1.6.7, GW1000(3) 1.7.7,WH2650 WiFi (2) 1.7.7 (test/backup), GW1100 2.3.1, GW2000(3) 3.1.1, HP2551 1.9.5,5.1.5;HP3500 1.7.2,WS3800 1.2.8, WN1910 1.2.3,WN1980 1.2.3;
Ecowitt WS90(2)1.3.5/1.4.0, WS80(2)1.2.5, WS68, WS69, WH40, WH31, WH31-EP, WN30, WN34L, WN35, WH32, WH32-EP, WH32B, WH57 [Lightning], WH41 [PM2.5], WH51, WH45, WH55
MeteobridgePro(2)[test,prod] 5.8 Mar 01 2024, 15185 - Blake-Larsen Sun Recorder - RPi4/weewx 4.8.0/4.10.2/CumulusMX 3283/Meteobridge RPi4B-2GB(3169)
Barani Meteoshield Pro, MetSpec Rad02 - Ecowitt 5763,34418;WU ISAARB3(WH4000SE),ISAARB22(HP2553), http://meshka.eu

Offline olicat

  • Forecaster
  • *****
  • Posts: 1515
  • GWxx00, HPx5x1C, WN1900C, WN1980C & WS3800C
    • FOSHKplugin
Re: Device firmware 1.7.8 for HP2551 console released
« Reply #8 on: March 10, 2022, 05:40:10 PM »
Hi!

Here, v1.7.8 behaves without any problems with regard to custom servers.
Do you also send to ecowitt.net? Do your data arrive there?

Oliver

Offline hiljo

  • Senior Contributor
  • ****
  • Posts: 257
    • Weerstation Hattem
Re: Device firmware 1.7.8 for HP2551 console released
« Reply #9 on: March 10, 2022, 05:41:24 PM »
did you check my edit points in the earlier post ? (you may have missed them)

I'm using EAR just to be sure.
The settings are as following:

 [ You are not allowed to view attachments ]

Here, v1.7.8 behaves without any problems with regard to custom servers.
Do you also send to ecowitt.net? Do your data arrive there?

Yes as i stated in my first post, the upload to the other webservers (Ecowitt.net) is functioning properly. Thats why i don't get it(?)
Just updated the firmware, changed language to Dutch to see the translation, and since then no custom upload anymore.
« Last Edit: March 10, 2022, 05:48:01 PM by hiljolodewijk »
Ecowitt HP2550C v1.9.3
2x GW2000 v3.1.1
WittBoy WS90 v1.3.8
Smart Sensors (WFC01 & AC1100) beta tester
3x WH31, WH32, WH40, WH41, WH57
WN34L, 2x WH51, WN35, WN34D

Dutch translator for Ecowitt.

https://www.weerstationhattem.nl/
  |
  |
  |
  | 
  |
  |
  |

Offline olicat

  • Forecaster
  • *****
  • Posts: 1515
  • GWxx00, HPx5x1C, WN1900C, WN1980C & WS3800C
    • FOSHKplugin
Re: Device firmware 1.7.8 for HP2551 console released
« Reply #10 on: March 10, 2022, 06:09:14 PM »
Hi!

Your settings for EAR seems ok.

Quote
Thats why i don't get it(?)
No.
But if the station cannot transmit at all, there would still be a general connection problem - WIFI, for example.
But if ecowitt.net works and the settings for EAR are correct, I don't understand why nothing comes through.
Strange.

Quote
The URL given in the custom upload isn't requested at all (I checked my Apache access logs, but no request was made, no data was sent, URL wasn't even queried).
This would at least explain why EAR does not see any of your data. The question remains why your station does not send via custom server.
My station here only sends to Ecowitt and to the custom server. Does your station have additional destinations?
I do not know the order of dispatch. But maybe an unsuccessful send to WU, WOW or WC blocks the subsequent data send via custom server?

Oliver

Offline hiljo

  • Senior Contributor
  • ****
  • Posts: 257
    • Weerstation Hattem
Re: Device firmware 1.7.8 for HP2551 console released
« Reply #11 on: March 11, 2022, 03:33:54 AM »
I've been debugging further..

It seems like it's a DNS problem (of the device?). When I directly enter an IP address of my server, a request is made and shows in the logs. When I use a domain name, no request is made. This is also the case for other websites/webservers/subdomains I tried. Also with a different IP addresses.

First I was afraid it was my webserver, but that doesn't explain why EAR (using url) doesn't work too.. And the GW2000 uses the same url, works perfectly.
Still don't know if it is a firmware problem or my local network.
Ecowitt HP2550C v1.9.3
2x GW2000 v3.1.1
WittBoy WS90 v1.3.8
Smart Sensors (WFC01 & AC1100) beta tester
3x WH31, WH32, WH40, WH41, WH57
WN34L, 2x WH51, WN35, WN34D

Dutch translator for Ecowitt.

https://www.weerstationhattem.nl/
  |
  |
  |
  | 
  |
  |
  |

Offline olicat

  • Forecaster
  • *****
  • Posts: 1515
  • GWxx00, HPx5x1C, WN1900C, WN1980C & WS3800C
    • FOSHKplugin
Re: Device firmware 1.7.8 for HP2551 console released
« Reply #12 on: March 11, 2022, 04:11:49 AM »
Hi!

This sounds very clearly like a firmware error.
I actually use a direct IP address here for all custom server functions. So I would not notice this problem.
But:
Yesterday, an HP2551C (interestingly, with a model name HP1000SE-PRO) with current firmware v1.7.8 reported to EAR.
However, this user will probably not have entered the IP address of the EAR server - so perhaps it is a local problem on your side with the DNS server and/or IPv6?
But maybe this user did not use the direct upload to EAR from the console but via a separate script or via e.g. FOSHKplugin.

Oliver

Offline Gyvate

  • Forecaster
  • *****
  • Posts: 3298
Re: Device firmware 1.7.8 for HP2551 console released
« Reply #13 on: March 11, 2022, 04:34:50 AM »
Hi!

This sounds very clearly like a firmware error.
I actually use a direct IP address here for all custom server functions. So I would not notice this problem.
But:
Yesterday, an HP2551C (interestingly, with a model name HP1000SE-PRO) with current firmware v1.7.8 reported to EAR.
However, this user will probably not have entered the IP address of the EAR server - so perhaps it is a local problem on your side with the DNS server and/or IPv6?
But maybe this user did not use the direct upload to EAR from the console but via a separate script or via e.g. FOSHKplugin.

Oliver
correct - that was me !
That's why I wrote in my earlier statement that everything works properly with 1.7.8 as far as I can see.
FOSHKplugin also behaved as expected, but the EAR connect was directly from the console.
WS2350 1.6.7, GW1000(3) 1.7.7,WH2650 WiFi (2) 1.7.7 (test/backup), GW1100 2.3.1, GW2000(3) 3.1.1, HP2551 1.9.5,5.1.5;HP3500 1.7.2,WS3800 1.2.8, WN1910 1.2.3,WN1980 1.2.3;
Ecowitt WS90(2)1.3.5/1.4.0, WS80(2)1.2.5, WS68, WS69, WH40, WH31, WH31-EP, WN30, WN34L, WN35, WH32, WH32-EP, WH32B, WH57 [Lightning], WH41 [PM2.5], WH51, WH45, WH55
MeteobridgePro(2)[test,prod] 5.8 Mar 01 2024, 15185 - Blake-Larsen Sun Recorder - RPi4/weewx 4.8.0/4.10.2/CumulusMX 3283/Meteobridge RPi4B-2GB(3169)
Barani Meteoshield Pro, MetSpec Rad02 - Ecowitt 5763,34418;WU ISAARB3(WH4000SE),ISAARB22(HP2553), http://meshka.eu

Offline hiljo

  • Senior Contributor
  • ****
  • Posts: 257
    • Weerstation Hattem
Re: Device firmware 1.7.8 for HP2551 console released
« Reply #14 on: March 11, 2022, 05:10:52 AM »
Well... last update: I now tried the WiFi-hotspot on my mobile phone to exclude if it was a local network or device problem. That gave results on EAR.
After I changed the URL to my old settings again, it now works properly as before :shock:

I don't know why it started working again. Maybe a problem with a DNS cache in the device (if it has one, i doubt it). Maybe the restart/update triggered something? Still not clear, but good to know that changing the WiFi and back solved the issue.
Ecowitt HP2550C v1.9.3
2x GW2000 v3.1.1
WittBoy WS90 v1.3.8
Smart Sensors (WFC01 & AC1100) beta tester
3x WH31, WH32, WH40, WH41, WH57
WN34L, 2x WH51, WN35, WN34D

Dutch translator for Ecowitt.

https://www.weerstationhattem.nl/
  |
  |
  |
  | 
  |
  |
  |

Offline BadWolf72

  • Senior Member
  • **
  • Posts: 52
Re: Device firmware 1.7.8 for HP2551 console released
« Reply #15 on: March 11, 2022, 01:36:40 PM »
Anyone else had an issue with updating firmware i lost all my settings even the date and time have been reset to factory defaults!!!! [ You are not allowed to view attachments ]
My Weather Station Information All 868Mhz

Ecowitt wittboy                             WS90
Ecowitt weather station                 HP2551
Ecowitt Gateway                           GW1100
Ecowitt Soil Temperature               WN34S
Ecowitt Air Quality Sensor (PM2.5) WH41     
Ecowitt Soil Moisture Sensor          WH51
Ecowitt Lightening Sensor              WH57

Offline BadWolf72

  • Senior Member
  • **
  • Posts: 52
Re: Device firmware 1.7.8 for HP2551 console released
« Reply #16 on: March 11, 2022, 01:57:11 PM »
ok after i connected it to my WiFi all my settings suddenly come back odd!!!
My Weather Station Information All 868Mhz

Ecowitt wittboy                             WS90
Ecowitt weather station                 HP2551
Ecowitt Gateway                           GW1100
Ecowitt Soil Temperature               WN34S
Ecowitt Air Quality Sensor (PM2.5) WH41     
Ecowitt Soil Moisture Sensor          WH51
Ecowitt Lightening Sensor              WH57

Offline tweatherman

  • Forecaster
  • *****
  • Posts: 537
Re: Device firmware 1.7.8 for HP2551 console released
« Reply #17 on: March 11, 2022, 11:59:29 PM »
No problems with the update on my end uploading to Ecowitt.

tweatherman

Offline Platokidd

  • top side land of Lincoln
  • Forecaster
  • *****
  • Posts: 636
Re: Device firmware 1.7.8 for HP2551 console released
« Reply #18 on: March 12, 2022, 08:48:49 AM »
Not sure what #4 is. Max/Min font color changed is?  My fonts dont change colors. Is this in reference to the colored ring around the temp?
Ambient
1-WS-5000 1-WS-2902A 2-WS40/RAIN 1-WH31L 
1-METEOBRIDGE 1-PM2.5 (WH41B) 3-WH31 1-SRX100LX

ECOWITT
2-HP2550 2-HP2560 2-GW2000 2-GW1100
2-WS68 1-WS80 1-WH32EP 10-WH31 1-WH40
1-HP10 2-WH45 4-WH55 5-WH51
1-WN30 1-WH41

1-DAVIS 7714
1-STRATUS
1-Fisher Barometer 1436R-22
PWS at 2 locations.
1- Storm Sensor-Zelda the dog ;)

Offline Gyvate

  • Forecaster
  • *****
  • Posts: 3298
Re: Device firmware 1.7.8 for HP2551 console released
« Reply #19 on: March 12, 2022, 09:00:40 AM »
I guess it's on the 2nd page (arrow up/down) ... Max/Min
They must have used a different color (red/yellow/blue) - probably more intense.
« Last Edit: March 12, 2022, 09:05:16 AM by Gyvate »
WS2350 1.6.7, GW1000(3) 1.7.7,WH2650 WiFi (2) 1.7.7 (test/backup), GW1100 2.3.1, GW2000(3) 3.1.1, HP2551 1.9.5,5.1.5;HP3500 1.7.2,WS3800 1.2.8, WN1910 1.2.3,WN1980 1.2.3;
Ecowitt WS90(2)1.3.5/1.4.0, WS80(2)1.2.5, WS68, WS69, WH40, WH31, WH31-EP, WN30, WN34L, WN35, WH32, WH32-EP, WH32B, WH57 [Lightning], WH41 [PM2.5], WH51, WH45, WH55
MeteobridgePro(2)[test,prod] 5.8 Mar 01 2024, 15185 - Blake-Larsen Sun Recorder - RPi4/weewx 4.8.0/4.10.2/CumulusMX 3283/Meteobridge RPi4B-2GB(3169)
Barani Meteoshield Pro, MetSpec Rad02 - Ecowitt 5763,34418;WU ISAARB3(WH4000SE),ISAARB22(HP2553), http://meshka.eu

Offline hiljo

  • Senior Contributor
  • ****
  • Posts: 257
    • Weerstation Hattem
Re: Device firmware 1.7.8 for HP2551 console released
« Reply #20 on: March 14, 2022, 04:59:57 AM »
Also good to know: The option for the rainfall priority is also used for the dashboard on the HP2550. The option on my console was set to prioritize the Haptic rain sensor, but tonight there was a littlebit of rain measured by my WH40 and not shown on the console (0.0 mm). When I changed the option from haptic to traditional, the measurements where shown again (0.3 mm).
Ecowitt HP2550C v1.9.3
2x GW2000 v3.1.1
WittBoy WS90 v1.3.8
Smart Sensors (WFC01 & AC1100) beta tester
3x WH31, WH32, WH40, WH41, WH57
WN34L, 2x WH51, WN35, WN34D

Dutch translator for Ecowitt.

https://www.weerstationhattem.nl/
  |
  |
  |
  | 
  |
  |
  |

Online Jiveborn

  • Jan
  • Member
  • *
  • Posts: 27
    • Jiveborn
Re: Device firmware 1.7.8 for HP2551 console released
« Reply #21 on: March 14, 2022, 09:18:44 AM »
Hey!

I'm not sure if my station should be updated as well. I have Froggit HP1000SE Pro and am wondering if I should download version 1.7.8 - download on SD card and update?  #-o

Best regards
Jan

Offline Gyvate

  • Forecaster
  • *****
  • Posts: 3298
Re: Device firmware 1.7.8 for HP2551 console released
« Reply #22 on: March 14, 2022, 11:17:40 AM »
yes, you can. The HP1000SE Pro console is technically exactly a HP2551, just having a different label.
You can also wait until Froggit publishes (the same files by the way), but that's usually with a few months delay.
All Fine Offset clones of the HP2551 (except Ambient WS-2000/WS-5000) can use this device firmware update !
« Last Edit: March 14, 2022, 11:20:00 AM by Gyvate »
WS2350 1.6.7, GW1000(3) 1.7.7,WH2650 WiFi (2) 1.7.7 (test/backup), GW1100 2.3.1, GW2000(3) 3.1.1, HP2551 1.9.5,5.1.5;HP3500 1.7.2,WS3800 1.2.8, WN1910 1.2.3,WN1980 1.2.3;
Ecowitt WS90(2)1.3.5/1.4.0, WS80(2)1.2.5, WS68, WS69, WH40, WH31, WH31-EP, WN30, WN34L, WN35, WH32, WH32-EP, WH32B, WH57 [Lightning], WH41 [PM2.5], WH51, WH45, WH55
MeteobridgePro(2)[test,prod] 5.8 Mar 01 2024, 15185 - Blake-Larsen Sun Recorder - RPi4/weewx 4.8.0/4.10.2/CumulusMX 3283/Meteobridge RPi4B-2GB(3169)
Barani Meteoshield Pro, MetSpec Rad02 - Ecowitt 5763,34418;WU ISAARB3(WH4000SE),ISAARB22(HP2553), http://meshka.eu

Online Jiveborn

  • Jan
  • Member
  • *
  • Posts: 27
    • Jiveborn
Re: Device firmware 1.7.8 for HP2551 console released
« Reply #23 on: March 14, 2022, 12:17:47 PM »
yes, you can. The HP1000SE Pro console is technically exactly a HP2551, just having a different label.
You can also wait until Froggit publishes (the same files by the way), but that's usually with a few months delay.
All Fine Offset clones of the HP2551 (except Ambient WS-2000/WS-5000) can use this device firmware update !

Updated and fully functional again. I can see the new icons and everything seems OK. Many thanks for the quick response!
 [tup]
Regards Jan

 

anything