Author Topic: Can I use an AW WH32M with an Ambient Weather ObserverIP Module?  (Read 283 times)

0 Members and 1 Guest are viewing this topic.

Offline bam

  • Member
  • *
  • Posts: 5
Will the Ambient Weather WH32M https://ambientweather.com/amwh32m.html work with the Ambient Weather ObserverIP Module properly?
I would like to an Ambient Weather WS-2801A with sensor and use the sensors also with the Ambient Weather ObserverIP Module https://ambientweather.com/amobserverip.html.
Working with the Ecowitt GW1000 would be an added bonus.

Offline bam

  • Member
  • *
  • Posts: 5
Re: Can I use an AW WH32M with an Ambient Weather ObserverIP Module?
« Reply #1 on: January 14, 2022, 02:59:39 PM »
I call Ambient Weather and their support persons said is should work.

Offline kheller2

  • Senior Contributor
  • ****
  • Posts: 181
Re: Can I use an AW WH32M with an Ambient Weather ObserverIP Module?
« Reply #2 on: January 14, 2022, 03:08:10 PM »
I'm not sure that is correct.  The 32M only has three addresses (and I don't know if they are equivalent to the WH31 range).  Someone else ever try this?  Well, some docs say it's three channel, other docs say it's eight.
« Last Edit: January 14, 2022, 03:14:36 PM by kheller2 »
Ambient Consoles: WS-2000, WS-1900, WS-1200, WS-2902C,  WS-3000-X3, WS-0900-IP(observerIP), WS-1001-WIFI
Ambient Arrays: WH65B
Ambient Sensors: 3xWH31E, 2xWH31B, WH32B, 2xWH31SM, WH31PGW, AQIN, 3xWH31LA
Ambient Spares: 2xWH24B, WH25B.
Ecowitt: GW1000B, GW1100B
Ecowitt Sensors: WH51, WN34BL, 2xWN34, WH31, WH41