Author Topic: WN32CP Temperature Humidity Pressure sensor  (Read 254 times)

0 Members and 1 Guest are viewing this topic.

Offline Rocketman

  • Member
  • *
  • Posts: 32
WN32CP Temperature Humidity Pressure sensor
« on: January 27, 2023, 03:46:02 AM »
Just got WN32CP with my Pantech WS off eBay . Just wondered why the sensor is not listed on the Ecowitt site ?
HP2550 console 1.8.7 firmware  , WS80 weather station , WH57 lightning sensor , WH40 rain gauge , WH51 soil moisture sensor , GX1100 gateway 2.2.1 firmware

Offline olicat

  • Forecaster
  • *****
  • Posts: 1100
  • GWxx00, HPx5x1C, WN1900C, WN1980C & FOSHKplugin
    • FOSHKplugin
Re: WN32CP Temperature Humidity Pressure sensor
« Reply #1 on: January 27, 2023, 04:00:34 AM »
Hi!

This is just another name for the WH32B aka WH32 indoor.
WN and WH are sometimes used synonymously.
C = 433MHz
P = pressure

Oliver

Offline Rocketman

  • Member
  • *
  • Posts: 32
Re: WN32CP Temperature Humidity Pressure sensor
« Reply #2 on: January 27, 2023, 01:17:38 PM »
Using gw1100 this device doesnít appear on the device list . How do I select it ?
HP2550 console 1.8.7 firmware  , WS80 weather station , WH57 lightning sensor , WH40 rain gauge , WH51 soil moisture sensor , GX1100 gateway 2.2.1 firmware

Offline olicat

  • Forecaster
  • *****
  • Posts: 1100
  • GWxx00, HPx5x1C, WN1900C, WN1980C & FOSHKplugin
    • FOSHKplugin
Re: WN32CP Temperature Humidity Pressure sensor
« Reply #3 on: January 27, 2023, 01:36:19 PM »
Hi!

Unless you cut the cable with the sensor from the GW1100, you will not be able to pair the WH32B with the GW1100.

Oliver

Offline kheller2

  • Forecaster
  • *****
  • Posts: 306
Re: WN32CP Temperature Humidity Pressure sensor
« Reply #4 on: January 27, 2023, 02:47:02 PM »
To elaborate on what Oliver said...
The GW1100 already has an indoor Temp/Hum/Pres sensor on the attached cable, so it will not use any other duplicate sensor.
[unless you cut the cable, in with case the firmware starts looking for the external one -- assuming your GW1100 is also 433MHz]

I believe there are some threads on here on how to convert the WH32 to be an outdoor sensor (minus pressure), overriding your array if need be.
Ambient Consoles: WS-2000, WS-1900, WS-1200, WS-2902C, WS-3000-X3, WS-0900-IP(observerIP), WS-1001-WIFI
Ambient Arrays: WH65B
Ambient Sensors: WH31E(3), WH31B(2), WH32B, WH31SM(2), WH31PGW, AQIN, WH31LA(3)
Ambient Spares: WH24B(2), WH25B.
Ecowitt: HP2551BU, GW1000B(dead), GW1100B(2), GW2000B
Ecowitt Sensors: WH51, WN34BL, WN34(2), WH31, WH41, WH40

Offline Rocketman

  • Member
  • *
  • Posts: 32
Re: WN32CP Temperature Humidity Pressure sensor
« Reply #5 on: January 27, 2023, 03:03:45 PM »
No problem , I'll just use the existing one ( just playing around )  [tup]
« Last Edit: January 27, 2023, 03:05:47 PM by Rocketman »
HP2550 console 1.8.7 firmware  , WS80 weather station , WH57 lightning sensor , WH40 rain gauge , WH51 soil moisture sensor , GX1100 gateway 2.2.1 firmware

Offline Platokidd

  • top side land of Lincoln
  • Forecaster
  • *****
  • Posts: 421
Re: WN32CP Temperature Humidity Pressure sensor
« Reply #6 on: January 27, 2023, 03:33:32 PM »
Hi!

Unless you cut the cable with the sensor from the GW1100, you will not be able to pair the WH32B with the GW1100.

Oliver

Interesting. So, may I assume the indoor wh32b will just appear in the sensor setting for the gw1100?
Does the same hold true for the gw1000 and gw2000?
« Last Edit: January 27, 2023, 03:36:20 PM by Platokidd »
Ambient    
2- WS-2000 2-WS-2902A ARRAYS 1-CONSOLE 2-WH40-RAIN 1-WH31L 1-METEOBRIDGE 2-PM2.5
3-WH-31E 1-SRX100LX 1-WH31SM
ECOWITT
3-HP2552-WH51 9-WH31-2-WH45-3-WH55
5-WH51 1-WH32EP 1-WN30
1-GW2000 2-GW1000 1-GW1100
1-HP10

1-Stratus

Offline BoDuke

  • Senior Member
  • **
  • Posts: 71
  • Ambient Weather, Ecowitt, WeeWX, Custom PHP
Re: WN32CP Temperature Humidity Pressure sensor
« Reply #7 on: January 27, 2023, 04:35:47 PM »
Yes, the GW1000, GW1100, and GW2000 can be physically modified so they no longer use the wired sensors and can use a WH32 indoor (WH32B) sensor instead.  It might also work on the HP2560 console but to my knowledge, this has not been verified yet.

Here are two topics where this is discussed:
https://www.wxforum.net/index.php?topic=43781
https://www.wxforum.net/index.php?topic=44706

Offline Rocketman

  • Member
  • *
  • Posts: 32
Re: WN32CP Temperature Humidity Pressure sensor
« Reply #8 on: January 27, 2023, 04:40:36 PM »
I guess it will according to latest firmware , but it doesn't have channel selection ( assume it will be channel 1 )
HP2550 console 1.8.7 firmware  , WS80 weather station , WH57 lightning sensor , WH40 rain gauge , WH51 soil moisture sensor , GX1100 gateway 2.2.1 firmware

Offline BoDuke

  • Senior Member
  • **
  • Posts: 71
  • Ambient Weather, Ecowitt, WeeWX, Custom PHP
Re: WN32CP Temperature Humidity Pressure sensor
« Reply #9 on: January 27, 2023, 04:43:46 PM »
The WH32B will appear as the barometer/pressure and indoor temperature.  There are no channels on WH32, only on WH31 and various other types of sensors.

Offline Platokidd

  • top side land of Lincoln
  • Forecaster
  • *****
  • Posts: 421
Re: WN32CP Temperature Humidity Pressure sensor
« Reply #10 on: January 27, 2023, 05:11:08 PM »
son of a gun.. I just snipped the wire.  Less than a minute it showed up and started working on my gw1100.

 [ You are not allowed to view attachments ]

 
« Last Edit: January 27, 2023, 05:13:28 PM by Platokidd »
Ambient    
2- WS-2000 2-WS-2902A ARRAYS 1-CONSOLE 2-WH40-RAIN 1-WH31L 1-METEOBRIDGE 2-PM2.5
3-WH-31E 1-SRX100LX 1-WH31SM
ECOWITT
3-HP2552-WH51 9-WH31-2-WH45-3-WH55
5-WH51 1-WH32EP 1-WN30
1-GW2000 2-GW1000 1-GW1100
1-HP10

1-Stratus

Offline kheller2

  • Forecaster
  • *****
  • Posts: 306
Re: WN32CP Temperature Humidity Pressure sensor
« Reply #11 on: Yesterday at 10:15:45 PM »
son of a gun.. I just snipped the wire.  Less than a minute it showed up and started working on my gw1100.

 [ You are not allowed to view attachments ]

Sweet.   But to be safe I would make sure those wires donít short together.  Either desolder them, or cut the internal wires at various lengths and tape. 
Ambient Consoles: WS-2000, WS-1900, WS-1200, WS-2902C, WS-3000-X3, WS-0900-IP(observerIP), WS-1001-WIFI
Ambient Arrays: WH65B
Ambient Sensors: WH31E(3), WH31B(2), WH32B, WH31SM(2), WH31PGW, AQIN, WH31LA(3)
Ambient Spares: WH24B(2), WH25B.
Ecowitt: HP2551BU, GW1000B(dead), GW1100B(2), GW2000B
Ecowitt Sensors: WH51, WN34BL, WN34(2), WH31, WH41, WH40

Offline Rocketman

  • Member
  • *
  • Posts: 32
Re: WN32CP Temperature Humidity Pressure sensor
« Reply #12 on: Today at 12:03:01 AM »
Or put a switch in maybe triple pole
HP2550 console 1.8.7 firmware  , WS80 weather station , WH57 lightning sensor , WH40 rain gauge , WH51 soil moisture sensor , GX1100 gateway 2.2.1 firmware