Weather Related Organizations > WeatherUnderground

Weather Underground Website Main Menu - PM2.5 Data

<< < (2/2)

OldAlaskaGuy:
I have a PM2.5 sensor and am reporting to Ambient Weather. It is only for particulate matter. It does show on my station page
here: https://dashboard.ambientweather.net/dashboard
The air quality shown on WU is from the local AQMD and not my station. It uses more parameters in its calculation.
Here: https://www.wunderground.com/weather/us/ca/grass-valley/KCAGRASS150

quailvalleywx:
I noticed that Wundermap recently? has air quality PM2.5 and PM10 data from Purple Air but PM2.5 and PM10 data sent to http://rtupdate.wunderground.com are still ignored.  Hopefully WU will start to propagate ingested air quality data but based on lack of progress on other items we still have a long wait.   

watsonm:
An update after three years !!!

I have been sending AqPM2.5 and AqPM10 readings to  weather underground along with all my other readings and they STILL don't show.   I suspect they
are getting the data  from the purple air site   so that they are "validated".  You need a valid purple air device  MAC  to send data there!

(I use a single PMS5003 unit which cost me about 30$ so how they justify nearly 300$ for their dual unit I am not sure.)

Zorglubxx:
My weather station uploads directly to WU and I've tried to upload separately the AqPM2.5 and AqPM10 readings from my PM2.5 sensor but when I do, my WU data for temperature, pressure, wind etc goes blank until it gets another measurement from the weather station. So not only WU won't display these PM2.5 readings, but I would have to find a way to upload all the data together in one go.

Any suggestions for a good site to use to upload this sensor data (international)?

Navigation

[0] Message Index

[*] Previous page