« previous next »
Pages: [1]   Go Down

Author Topic: IP Tools With WS2902A  (Read 503 times)

0 Members and 1 Guest are viewing this topic.

Offline OldAlaskaGuy

  • Alaska, The Last American Frontier
  • Forecaster
  • *****
  • Posts: 510
  • An old Alaska guy living in an insane world.
IP Tools With WS2902A
« on: April 26, 2025, 08:00:10 PM »
When setting up an Ambient WS2902A Using IP Observer what option should I use for the station model number? WS2902A not listed. No instructions to connect to a IP Observer. Not using a console.
Logged
Ambient Weather: WS-2902, IP Observer v4.6.2
Ecowitt: GW1000B: v1.7.8, GW1200B v1.3.8, GW3000B v1.0.9
Sending weather data to, Ambient CWOP, Ambient Weather, AWEKAS, Ecowitt, PWS Weather, Weathercloud, Wunderground, MADIS, and APRS
CumulusMX dashboard. V4.5.2b4505
Ambient Weather  https://ambientweather.net/dashboard/b71db9ae6b3ebd3a3db1864a6b9eeb2b
Ecowitt https://www.ecowitt.net/home/share?authorize=SEJRPK
AEKAS https://stationsweb.awekas.at/home?id=20470

Offline Gyvate

  • Forecaster
  • *****
  • Posts: 4724
Re: IP Tools With WS2902A
« Reply #1 on: April 27, 2025, 03:27:14 AM »
try WS-1550-IP
Logged
WS2350 1.7.0,GW1000 1.7.7,WH2650 WiFi 1.7.7,GW1100 2.3.7,GW1200 1.3.4,GW2000 3.2.1,GW3000 1.0.3,HP2550 2.0.1,5.1.9; HP3500 1.7.2,WS3800 1.3.4, WS3910 1.3.4, WN1910 1.2.4,WN1820/WN1980 1.3.5;
Ecowitt WS90, WS85, WS80, WS68, WS69, WN30, WH31,WH31-EP, WH32,WH32-EP, WH32B/WN32P, WN34D,L,S,  WN35,WH40, WH41[PM2.5], WH45, WH46D, WH51, WH55, WH57, LDS01
Blake-Larsen Sun Recorder - RPi4/weewx 4.10.2/CumulusMX 4063/MeteobridgePro 6.1,Meteobridge RPi4B-2GB,MB VM
Barani Meteoshield Pro,MetSpecRad02,SMarTCELLino;Dracal BAR20
weather landing page: http://meshka.eu
WIKI https://meshka.eu/Ecowitt/dokuwiki

Offline kheller2

  • Karl with a K.
  • Forecaster
  • *****
  • Posts: 693
Re: IP Tools With WS2902A
« Reply #2 on: April 27, 2025, 06:42:23 AM »
I use a WS-1900-IP setting on mine.   I'm on firmware 4.6.2 and have to reboot the thing almost monthly to keep the GUI responsive.   (It still uploads just fine in this slow condition, however).
Logged
- Karl who has lost count of what he owns.
Ambient Consoles: WS-2000, WS-1900, WS-1200, WS-2902C, WS-3000-X3, WS-0900-IP(observerIP), WS-1001-WIFI
Ambient Arrays: WH65B
Ambient Sensors: WH31E(3), WH31B(2), WH32B, WH31SM(2), WH31PGW, AQIN, WH31LA(3)
Ambient Spares: WH24B(2), WH25B.
Ecowitt: HP2551BU, GW1000B(dead), GW1100B(2), GW2000B, GW3000
Ecowitt Sensors: WH51, WN34BL, WN34(2), WH31, WH41, WH40, etc.

Offline Gyvate

  • Forecaster
  • *****
  • Posts: 4724
Re: IP Tools With WS2902A
« Reply #3 on: April 27, 2025, 02:39:59 PM »
I'm assuming that we are talking about the Observer IP 1.0 gateway here. Meanwhile there are also IP2 (a factual GW2000 with the Ambient restrictions) and the IP3 (a factual GW3000 with the Ambient restrictions and without an outside moveable antenna). An Observer IP 1.0 understands a WH65 outdoor array and the WS-2902A, B, C, D consoles understand the WH65.
The Ambient Observer IP before 15xx are rather focussed on the WH24.
For Ambient, Observer IP is a station name with the ObserverIP 1.0 LAN gateway and the outdoor array WH24 (boat) and WH65 (Osprex).
« Last Edit: April 27, 2025, 02:43:09 PM by Gyvate »
Logged
WS2350 1.7.0,GW1000 1.7.7,WH2650 WiFi 1.7.7,GW1100 2.3.7,GW1200 1.3.4,GW2000 3.2.1,GW3000 1.0.3,HP2550 2.0.1,5.1.9; HP3500 1.7.2,WS3800 1.3.4, WS3910 1.3.4, WN1910 1.2.4,WN1820/WN1980 1.3.5;
Ecowitt WS90, WS85, WS80, WS68, WS69, WN30, WH31,WH31-EP, WH32,WH32-EP, WH32B/WN32P, WN34D,L,S,  WN35,WH40, WH41[PM2.5], WH45, WH46D, WH51, WH55, WH57, LDS01
Blake-Larsen Sun Recorder - RPi4/weewx 4.10.2/CumulusMX 4063/MeteobridgePro 6.1,Meteobridge RPi4B-2GB,MB VM
Barani Meteoshield Pro,MetSpecRad02,SMarTCELLino;Dracal BAR20
weather landing page: http://meshka.eu
WIKI https://meshka.eu/Ecowitt/dokuwiki
Pages: [1]   Go Up
« previous next »
 

anything