Be sure you make a backup and note all your configuration settings.... <--- Words to live by when updating anything
Just some observations when I updated from p50 to P55.
If your using a Davis USB Logger, these all use a USB to serial Driver. be sure to make a note of the com port you are using, and be sure to select Davis serial when updating. If for some reason you need to go to Pure USB, you will be required to install the latest weatherlink software & use it to configure your logger to use USB. Only then can you run WVS and select Davis USB. There is no benefit to going to USB unless your having problems from what I have seen. Even if you select serial you will still see a message to load Weaterlink. If you are already running VWS you can probably ignore this.
You will need to re-enter your station name, location, altitude etc. Be sure you noted these settings before you upgrade.
You will need to re-enter the information on the weather underground 5 day forecast screen. Again be sure to note this information before you upgrade.
I have spoken with ED about these, and they are all known... He is addressing things like crazy, thanks Ed for your assistance. Some of this may be a repeat, but wanted to put it all in one place
Rich
weather.taftphoto.com