Topic: Ambient Meteobridge and Ecowitt GW3000. **solved**

[Platokidd]

Will the new Ecowitt GW3000 work with the Ambient Meteobridge
Platform:   TL-MR3020  ?

[Platokidd]

Will the new Ecowitt GW3000 work with the Ambient Meteobridge
Platform:   TL-MR3020  ?

Thought I would give the GW3000 a try. Been a few days now and seems to be working just fine

[VinnyRI]

Just received my GW3000. Do you have GW1000 selected as the weather station? I currently have the GW1100 and it works fine! Will set up the GW3000 tomorrow.

[Platokidd]

Just received my GW3000. Do you have GW1000 selected as the weather station? I currently have the GW1100 and it works fine! Will set up the GW3000 tomorrow.

Yes, I selected the GW1000 as the weather station in the meteobrige.

[VinnyRI]

Just set it up. Only took a few minutes! Meteobridge Receiving the sensor array data along with all the extra sensors!

[docbee]

Thanks for confirming that GW3000 runs same protocol like GW1000 and by that is fully supported by Meteobridge. I also updated the Wiki.

[Gyvate]

Thanks for confirming that GW3000 runs same protocol like GW1000 and by that is fully supported by Meteobridge. I also updated the Wiki.

that's half the truth only - even though the GW3000 supports both APIs, the local binary ("telnet") API and the local http API, only the http API will provide all sensor data, especially for the new sensors like WH46D and LDS01.
Meanwhile there is a special driver for the GW3000 available in Meteobridge using the local http API instead of the local binay API.
The GW3000 driver can be used for all consoles with the local APIs - except for the GW1000/WH2650/2680 gateways which can only be queried via the local binanry API - they need the GW1000 driver in Meteobridge.

[docbee]

Meteobridge now also supports the Ecowitt JSON API. You can select GW3000 in the station drop-down list to make use of this.

As it is rather new, there might be bugs. If you find a bug, please report at forum.meteobridge.com.

[Gyvate]

Meteobridge now also supports the Ecowitt JSON API. You can select GW3000 in the station drop-down list to make use of this.

As it is rather new, there might be bugs. If you find a bug, please report at forum.meteobridge.com.

what @docbee calls JSON API is the local Ecowitt http API  (as opposite to the local Ecowitt binary API a.k.a. telnet API) - just to be clear on terms
there are more Ecowitt APIs for different purposes which can be queried and provide responses in JSON format 

[Platokidd]

Meteobridge now also supports the Ecowitt JSON API. You can select GW3000 in the station drop-down list to make use of this.

As it is rather new, there might be bugs. If you find a bug, please report at forum.meteobridge.com.

AW Meteobridge when set on GW3000 nothing works. As I stated above in this thread, the gw3000 works fine when set on gw1000.
Will report at the forum.meteobridge.com.

[docbee]

AW Meteobridge when set on GW3000 nothing works.

Can you please be a bit more specific, what is not working? Most things are working IMHO.

[Platokidd]

AW Meteobridge when set on GW3000 nothing works.

Can you please be a bit more specific, what is not working? Most things are working IMHO.

 Weather Network sites do not populate with any data. Example weather underground and so on. Min/Max Data, Live Data becomes stale (not updating). This is with the Ambient Weather Meteobrige running on 6.2.

Yes my station settings for the GW3000 are correct
 [ You are not allowed to view attachments ]

[Platokidd]

The bug has been fixed for the GW3000 station setting.