« previous next »
Pages: [1]   Go Down

Author Topic: New sensor firmware for WS90 (1.4.8) and new pluggable WS90 T/RH module  (Read 2076 times)

0 Members and 1 Guest are viewing this topic.

Offline Gyvate

  • Forecaster
  • *****
  • Posts: 4402
New sensor firmware for WS90 (1.4.8) and new pluggable WS90 T/RH module
« on: November 28, 2024, 04:44:13 AM »
firmware 1.4.8 for the WS90 is about to be released
changelog:
Supports the new T&H module hardware with dual T&H compensation

that may sound a bit enigmatic

what's behind that is a newly developed T/RH sensor for the WS90 which will cater for the T/RH deviations caused by the WS90 inbuilt heater

it will be a pluggable sensor module and available soon as accessory at shop.ecowitt.com
Logged
WS2350 1.7.0,GW1000 1.7.7,WH2650 WiFi 1.7.7,GW1100 2.3.7,GW1200 1.3.4,GW2000 3.2.1,GW3000 1.0.3,HP2550 2.0.1,5.1.9; HP3500 1.7.2,WS3800 1.3.4, WS3910 1.3.4, WN1910 1.2.4,WN1820/WN1980 1.3.5;
Ecowitt WS90, WS85, WS80, WS68, WS69, WN30, WH31,WH31-EP, WH32,WH32-EP, WH32B/WN32P, WN34D,L,S,  WN35,WH40, WH41[PM2.5], WH45, WH46D, WH51, WH55, WH57, LDS01
Blake-Larsen Sun Recorder - RPi4/weewx 4.10.2/CumulusMX 4063/MeteobridgePro 6.1,Meteobridge RPi4B-2GB,MB VM
Barani Meteoshield Pro,MetSpecRad02,SMarTCELLino;Dracal BAR20
weather landing page: http://meshka.eu
WIKI https://meshka.eu/Ecowitt/dokuwiki

Offline NightLonk

  • Member
  • *
  • Posts: 4
Re: New sensor firmware for WS90 (1.4.8) and new pluggable WS90 T/RH module
« Reply #1 on: November 30, 2024, 02:39:24 PM »
This is great news! My WS90 is plugged in so I don't need to climb up onto my roof to swap the batteries and I've been noticing the temp fluctuate because of the heater.

Hopefully this releases soon!
« Last Edit: November 30, 2024, 02:41:18 PM by NightLonk »
Logged

Offline giusCB

  • www.turismometeo.it
  • Forecaster
  • *****
  • Posts: 447
    • TurismoMeteo OdV Webcam Streaming and Weather Stations live
Re: New sensor firmware for WS90 (1.4.8) and new pluggable WS90 T/RH module
« Reply #2 on: December 01, 2024, 09:58:42 AM »
We are currently testing a solution to make the radiation shield more efficient, but it’s not yet ready to be released on the market. I started testing this new TH today.
 [ You are not allowed to view attachments ]
Logged
www.turismometeo.it
Webcam and Weather Stations live network from Italy

Offline Rocketman

  • Forecaster
  • *****
  • Posts: 508
Re: New sensor firmware for WS90 (1.4.8) and new pluggable WS90 T/RH module
« Reply #3 on: December 03, 2024, 03:12:30 PM »
Any progress on this ?
Logged
HP2550,FW 2.0.1, WS80 FW1.2.9, WH57 , WH40 , WH51, GW1100 FW2.3.4 , WN90LP FW1.4.7 wirelessly to Hongyuv HY Display, INKBIRD iAMQ-128W V1.1, WH55 x 2 , WN34D

Offline Autofill

  • Forecaster
  • *****
  • Posts: 311
Re: New sensor firmware for WS90 (1.4.8) and new pluggable WS90 T/RH module
« Reply #4 on: December 04, 2024, 07:12:36 PM »
Interesting. Looks like a dual temp sensor. Presumably the one closest to the heater will be warmer than the one that isn't and then some sort of Correction or correlation factor is applied. That's just my guess

I personally solved the problem by using a mathematical equation when it's -40oC my temperature could be up to 4° off and just did a linear correction beginning from +5 to -40° C.

Now my temps are always within 1oC of my WH69
« Last Edit: December 04, 2024, 07:15:58 PM by Autofill »
Logged
Ecowitt WH2320-E
Ecowitt HP2551-C (SOLD - replaced with Home Assistant Fully Kiosk FireTab HD10)
Ecowitt GW1000
Ecowitt GW1100
Ecowitt WH69E
Ecowitt WH32B
Ecowitt WH57 (x3)
Ecowitt WH51 (x6)
Ecowitt WH41
Ecowitt WH41 (Honeywell-based USB/Supercap modified)
Ecowitt WH31 (x8)
Ecowitt WH55 (x4)
Ecowitt WH45
Ecowitt WN34S (x2)
Ecowitt WN35
Ecowitt LDS01
Ecowitt Wittboy running on 12VDC  solar power

Offline Mattia07

  • Member
  • *
  • Posts: 1
Re: New sensor firmware for WS90 (1.4.8) and new pluggable WS90 T/RH module
« Reply #5 on: December 14, 2024, 08:50:09 AM »
Logged

Offline NightLonk

  • Member
  • *
  • Posts: 4
Re: New sensor firmware for WS90 (1.4.8) and new pluggable WS90 T/RH module
« Reply #6 on: December 14, 2024, 01:10:24 PM »
Logged

Offline Gyvate

  • Forecaster
  • *****
  • Posts: 4402
Re: New sensor firmware for WS90 (1.4.8) and new pluggable WS90 T/RH module
« Reply #7 on: December 14, 2024, 01:25:04 PM »
Logged
WS2350 1.7.0,GW1000 1.7.7,WH2650 WiFi 1.7.7,GW1100 2.3.7,GW1200 1.3.4,GW2000 3.2.1,GW3000 1.0.3,HP2550 2.0.1,5.1.9; HP3500 1.7.2,WS3800 1.3.4, WS3910 1.3.4, WN1910 1.2.4,WN1820/WN1980 1.3.5;
Ecowitt WS90, WS85, WS80, WS68, WS69, WN30, WH31,WH31-EP, WH32,WH32-EP, WH32B/WN32P, WN34D,L,S,  WN35,WH40, WH41[PM2.5], WH45, WH46D, WH51, WH55, WH57, LDS01
Blake-Larsen Sun Recorder - RPi4/weewx 4.10.2/CumulusMX 4063/MeteobridgePro 6.1,Meteobridge RPi4B-2GB,MB VM
Barani Meteoshield Pro,MetSpecRad02,SMarTCELLino;Dracal BAR20
weather landing page: http://meshka.eu
WIKI https://meshka.eu/Ecowitt/dokuwiki

Offline giusCB

  • www.turismometeo.it
  • Forecaster
  • *****
  • Posts: 447
    • TurismoMeteo OdV Webcam Streaming and Weather Stations live
Re: New sensor firmware for WS90 (1.4.8) and new pluggable WS90 T/RH module
« Reply #8 on: December 15, 2024, 05:34:47 AM »
I'm testing it, but there is an underestimation of the minimum temperatures.
Logged
www.turismometeo.it
Webcam and Weather Stations live network from Italy

Offline Meteorology fan

  • Forecaster
  • *****
  • Posts: 608
Re: New sensor firmware for WS90 (1.4.8) and new pluggable WS90 T/RH module
« Reply #9 on: December 15, 2024, 05:44:13 AM »
It is better to bet on a separate sensor like WH32EP and insulate yourself from the poor shielding in the WS90 Wittboy by equipping yourself with a better shield. All the more as we have a problem when the heater is running.

https://shop.ecowitt.com/collections/thermometer-probe-sensor
https://shop.ecowitt.com/collections/thermometer-probe-sensor/products/wh32_ep
Logged
Ecowitt WS90 1.3.8, WS80 1.2.5, Ecowitt WS68, Ecowitt WH31EP/WH32EP, WH40, WH57, WN34L, WH51, WN34D, HP2560_C, HP2550_C, GW1100, GW2000. Davis Vantage Pro 2, Davis Vue, Davis 6313, Hongyuv WDS2E

PT1000 4-wire - Termio 2 (3x)

Barani Meteoshield Pro II, III, Davis FARS 24H, Apogee TS100

Offline Gyvate

  • Forecaster
  • *****
  • Posts: 4402
Re: New sensor firmware for WS90 (1.4.8) and new pluggable WS90 T/RH module
« Reply #10 on: December 15, 2024, 02:09:10 PM »
Quote from: Meteorology fan on December 15, 2024, 05:44:13 AM
It is better to bet on a separate sensor like WH32EP and insulate yourself from the poor shielding in the WS90 Wittboy by equipping yourself with a better shield. All the more as we have a problem when the heater is running.

https://shop.ecowitt.com/collections/thermometer-probe-sensor
https://shop.ecowitt.com/collections/thermometer-probe-sensor/products/wh32_ep
With the new module this is no longer a necessity for the temperature impact of the heating.

However, if you want to read your outdoor T/RH in a place different from the WS90 mounting place, that advice is valid.
For good to very good radiation shields see our WiKi
https://meshka.eu/Ecowitt/dokuwiki/doku.php?id=start#passive_solar_radiation_shields_shelters_-_stevenson_screens
Logged
WS2350 1.7.0,GW1000 1.7.7,WH2650 WiFi 1.7.7,GW1100 2.3.7,GW1200 1.3.4,GW2000 3.2.1,GW3000 1.0.3,HP2550 2.0.1,5.1.9; HP3500 1.7.2,WS3800 1.3.4, WS3910 1.3.4, WN1910 1.2.4,WN1820/WN1980 1.3.5;
Ecowitt WS90, WS85, WS80, WS68, WS69, WN30, WH31,WH31-EP, WH32,WH32-EP, WH32B/WN32P, WN34D,L,S,  WN35,WH40, WH41[PM2.5], WH45, WH46D, WH51, WH55, WH57, LDS01
Blake-Larsen Sun Recorder - RPi4/weewx 4.10.2/CumulusMX 4063/MeteobridgePro 6.1,Meteobridge RPi4B-2GB,MB VM
Barani Meteoshield Pro,MetSpecRad02,SMarTCELLino;Dracal BAR20
weather landing page: http://meshka.eu
WIKI https://meshka.eu/Ecowitt/dokuwiki

Offline kristofferR

  • Member
  • *
  • Posts: 2
Re: New sensor firmware for WS90 (1.4.8) and new pluggable WS90 T/RH module
« Reply #11 on: January 11, 2025, 02:45:56 PM »
Hehe, March 9th comes early this year (see screenshot)
« Last Edit: January 11, 2025, 02:52:31 PM by kristofferR »
Logged

Offline Gyvate

  • Forecaster
  • *****
  • Posts: 4402
Re: New sensor firmware for WS90 (1.4.8) and new pluggable WS90 T/RH module
« Reply #12 on: January 11, 2025, 02:51:35 PM »
Quote from: kristofferR on January 11, 2025, 02:45:56 PM
Hehe, March 9th comes early this year.
one day earlier than last year  \:D/
Logged
WS2350 1.7.0,GW1000 1.7.7,WH2650 WiFi 1.7.7,GW1100 2.3.7,GW1200 1.3.4,GW2000 3.2.1,GW3000 1.0.3,HP2550 2.0.1,5.1.9; HP3500 1.7.2,WS3800 1.3.4, WS3910 1.3.4, WN1910 1.2.4,WN1820/WN1980 1.3.5;
Ecowitt WS90, WS85, WS80, WS68, WS69, WN30, WH31,WH31-EP, WH32,WH32-EP, WH32B/WN32P, WN34D,L,S,  WN35,WH40, WH41[PM2.5], WH45, WH46D, WH51, WH55, WH57, LDS01
Blake-Larsen Sun Recorder - RPi4/weewx 4.10.2/CumulusMX 4063/MeteobridgePro 6.1,Meteobridge RPi4B-2GB,MB VM
Barani Meteoshield Pro,MetSpecRad02,SMarTCELLino;Dracal BAR20
weather landing page: http://meshka.eu
WIKI https://meshka.eu/Ecowitt/dokuwiki

Offline kristofferR

  • Member
  • *
  • Posts: 2
Re: New sensor firmware for WS90 (1.4.8) and new pluggable WS90 T/RH module
« Reply #13 on: January 11, 2025, 02:53:43 PM »
For me March 9th was yesterday, as the SHT30 wouldn't ship before March 9th and the SHT30 shipped yesterday  :lol: #-o
Logged
Pages: [1]   Go Up
« previous next »
 

anything