WXforum.net
Weather Station Hardware => The WxTech Dream Machine => Topic started by: joegr on March 27, 2018, 03:24:40 PM
-
I made a little Arduino based receiver to replace the obsoleted Acurite smart hub. I mainly did this because I needed a way to get the data from the sensor(s) into my home automation. However, I did set it up to send data to Weather Underground too.
https://github.com/joegr123/WeatherStation
-
That;s great! I also note one of the links shows the Raspberry Pi build!!!
-
Fits any Acurite monitor? I have a 01035 model station.
-
I made a little Arduino based receiver to replace the obsoleted Acurite smart hub. I mainly did this because I needed a way to get the data from the sensor(s) into my home automation. However, I did set it up to send data to Weather Underground too.
https://github.com/joegr123/WeatherStation
I am having some difficulties making it work.... Are you available to help troubleshoot? I am guessing I am missing something simple....
-
I guess that depends on what you mean by available. I can answer some questions back and forth via email.
-
It would work for me... I could also do facebook messenger, and google hangouts too if either of those work. Send me your email address (use a private message if you prefer to not post it public)
Thanks!
I figure I am missing something simple, knowing my track record with things LOL
-
Thanks Joe for the quick help! Solved my issue, and it works great now!
Just to document for anyone needing it in the future....
In the D_Interrupts file, locate:
void handler()
and change it to:
void IRAM_ATTR handler()
Joe stated that something was changed in the Arduino IDE that requires this modification.
Thanks again Joe!!
-
Another update.... Some library changes have effected the code for the BMP280. If you want to use a BMP280 with this, you need to find and comment out the following lines:
digitalWrite(LED_BUILTIN, !bitState); - in D_Interrupts
digitalWrite(LED_BUILTIN, HIGH); // start with LED off - E_Setup
pinMode(LED_BUILTIN, OUTPUT); // LED output - E_Setup