Author Topic: RPi 4B MeteoPI and Davis Vantage Pro 2 Not Passing Data  (Read 1133 times)

0 Members and 1 Guest are viewing this topic.

Offline KK7GO

  • Member
  • *
  • Posts: 5
RPi 4B MeteoPI and Davis Vantage Pro 2 Not Passing Data
« on: April 20, 2021, 10:23:28 PM »
Greetings,

I have search this forum unsuccessfully to find a solution to my issue. If I missed a post, please provide link.

I upgraded to a RPi 4B, using Twister OS. I am also using WeeWx. My weather station is a Davis Vantage Pro2. The MeteoPi is the data logger. I boot the RPi via USB

I am not seeing the ttyUSB0 serial connecting. I have enabled the UART.

I thought the weewx.conf file is correct, but I may have missed something.

Any information links or ideas are appreciated.

Thanks for the help.

Ron

Offline WiFiLogger

  • Forecaster
  • *****
  • Posts: 731
Re: RPi 4B MeteoPI and Davis Vantage Pro 2 Not Passing Data
« Reply #1 on: April 22, 2021, 12:36:32 PM »
Hi,

Did you set Serial like on screen shot?

 [ You are not allowed to view attachments ]

Offline rcnz

  • Member
  • *
  • Posts: 29
Re: RPi 4B MeteoPI and Davis Vantage Pro 2 Not Passing Data
« Reply #2 on: November 15, 2021, 02:10:36 PM »
Hi.

Similar issue.

I'd been using WeeWX with Davis logger.

I bought my WFL and Meteo-Pi together.

WFL has been working perfectly.  [tup]

I replaced it with My M-P, set the interfaces per Wojtek's screenshot, but am not seeing any output from M-P.

I'm hoping to resume using WeeWX, but need some guidance re output ports/methods, etc, please.

Thanks

Robin..
Davis Vantage Pro 2
WeeWX 4.10.2 | Meteo-Pi Ethernet Logger
AWEKAS
CWOP  (MPiE Direct)
OpenWeatherMap
PWS Weather
WeatherCloud
Windy
Windfinder
WL (MPiE Direct)
WOW ((MPiE Direct)
WU

WU:
https://www.wunderground.com/dashboard/pws/IAUCKLAN159

Offline johnd

  • Forecaster
  • *****
  • Posts: 4827
    • www.weatherstations.co.uk
Re: RPi 4B MeteoPI and Davis Vantage Pro 2 Not Passing Data
« Reply #3 on: November 15, 2021, 03:39:00 PM »
Which serial port have you tried? ttyS0 or ttyS1? Or both?
Prodata Weather Systems
Prodata's FAQ/support site for Davis stations
Includes many details on 6313 Weatherlink console.
UK Davis Premier Dealer - All Davis stations, accessories and spares
Cambridge UK

Sorry, but I don't usually have time to help with individual issues by email unless you are a Prodata customer. Please post your issue in the relevant forum section here & I will comment there if I have anything useful to add.

Offline rcnz

  • Member
  • *
  • Posts: 29
Re: RPi 4B MeteoPI and Davis Vantage Pro 2 Not Passing Data
« Reply #4 on: November 16, 2021, 06:43:49 PM »
Thanks, johnd.

I was struggling to get this sorted.

I ran wee_config --reconfigure and chose ttyS0

Then I pasted previous station data into the clean 4.5.1 weewx.conf

Problem solved!

Two days of pain fixed

 =D>
Davis Vantage Pro 2
WeeWX 4.10.2 | Meteo-Pi Ethernet Logger
AWEKAS
CWOP  (MPiE Direct)
OpenWeatherMap
PWS Weather
WeatherCloud
Windy
Windfinder
WL (MPiE Direct)
WOW ((MPiE Direct)
WU

WU:
https://www.wunderground.com/dashboard/pws/IAUCKLAN159