WXforum.net

Weather Station Hardware => Davis Instruments Weather Stations => Topic started by: craigstafford on August 17, 2019, 10:30:53 AM

Title: connecting Davis 6163 to meteobridge standard and weather link 6100
Post by: craigstafford on August 17, 2019, 10:30:53 AM

Got my weather station components in and I'm having problems with connecting the meteobridge standard to Davis Console. The only port on the console is for a data logger and the diagram shows a usb connection. Ive setup the ISS and its communicating with the console. I'm stymied as to how to proceed. Thanks for any and all help

Title: Re: connecting Davis 6163 to meteobridge standard and weather link 6100
Post by: galfert on August 17, 2019, 12:15:51 PM

The Meteobridge supports the Weatherlink 6100 via the network. There is no need for USB connection. The USB connection if for those that have a USB data logger on connected to the back of the console.

Just go to the Weather Station tab on the Meteobridge and select Davis Weather Link Live and fill it in with your WeatherLink Live's IP address and select ISS...

 [ You are not allowed to view attachments ]

Basically in your case the Meteobridge will not be getting data from the display console. Instead the Meteobridge will be getting its data from the WeatherLink Live.