« previous next »
Pages: [1]   Go Down

Author Topic: New F/W for GW1100 V2.3.2  (Read 450 times)

0 Members and 1 Guest are viewing this topic.

Offline broadstairs

  • Forecaster
  • *****
  • Posts: 867
New F/W for GW1100 V2.3.2
« on: April 27, 2024, 12:20:08 PM »
Found this when looking at all my gateways. Same items in changelog as per the GW1200.

Stuart
« Last Edit: April 27, 2024, 01:31:34 PM by broadstairs »
Logged
Ecowitt GW1003 with ultrasonic wind gauge, lightning sensor and PM2.5 sensor with Personal Weather Tablet as a console.

Offline olicat

  • Forecaster
  • *****
  • Posts: 1535
  • GWxx00, HPx5x1C, WN1900C, WN1980C & WS3xx0C
    • FOSHKplugin
Re: New F/W for GW1100 V2.3.2
« Reply #1 on: April 27, 2024, 01:21:02 PM »
Hi!

Installed here and no problems so far.

Oliver
Logged

Offline broadstairs

  • Forecaster
  • *****
  • Posts: 867
Re: New F/W for GW1100 V2.3.2
« Reply #2 on: April 27, 2024, 01:32:05 PM »
Yes working fine here.

Stuart
Logged
Ecowitt GW1003 with ultrasonic wind gauge, lightning sensor and PM2.5 sensor with Personal Weather Tablet as a console.

Offline jbroome

  • Senior Member
  • **
  • Posts: 60
Re: New F/W for GW1100 V2.3.2
« Reply #3 on: April 27, 2024, 06:52:03 PM »
Logged
Collector of Ecowitt and related gizmos:
GW1000 x3 (both 915 MHz and 433 MHz)
GW1100 x2 (both 915 MHz and 433 MHz)
GW1200 x2 (both 915 MHz and 433 MHz)
GW2000 (915 MHz)
WH31
WH31P
WH32E
WH32B
WH34BS
WH34BL
WN35
WH40
WH41
WH45
WH46
WH51
WH55
WH57
WH65B
WH68
WS90BN
(and probably more that I've forgotten)

Offline meteobreda

  • Member
  • *
  • Posts: 8
Re: New F/W for GW1100 V2.3.2
« Reply #4 on: April 29, 2024, 03:34:39 AM »
Hello,

I have a gw1100 not connect to WiFi.
Red led is fix on but low light.
It's possible load the firmware with an esp programmer using the pads in the board?

Thankyou
Logged

Offline Gyvate

  • Forecaster
  • *****
  • Posts: 3392
Re: New F/W for GW1100 V2.3.2
« Reply #5 on: April 29, 2024, 05:23:58 AM »
before going down that road - did you go through all the options shown in the How to connect to WiFi thread https://www.wxforum.net/index.php?topic=41575.0 respectively the WiKi http://meshka.eu/Ecowitt/dokuwiki/doku.php?id=start#how_to_connect_pair_your_console_gateway_to_your_router
Logged
WS2350 1.6.7, GW1000(3) 1.7.7,WH2650 WiFi (2) 1.7.7 (test/backup), GW1100 2.3.1, GW2000(3) 3.1.1, HP2551 1.9.5,5.1.5;HP3500 1.7.2,WS3800 1.2.8, WN1910 1.2.3,WN1980 1.2.3;
Ecowitt WS90(2)1.3.5/1.4.0, WS80(2)1.2.5, WS68, WS69, WH40, WH31, WH31-EP, WN30, WN34L, WN35, WH32, WH32-EP, WH32B, WH57 [Lightning], WH41 [PM2.5], WH51, WH45, WH55
MeteobridgePro(2)[test,prod] 5.8 Mar 01 2024, 15185 - Blake-Larsen Sun Recorder - RPi4/weewx 4.8.0/4.10.2/CumulusMX 3283/Meteobridge RPi4B-2GB,
Barani Meteoshield Pro, MetSpec Rad02
weather landing page: http://meshka.eu
WIKI http://meshka.eu/Ecowitt/dokuwiki

Offline broadstairs

  • Forecaster
  • *****
  • Posts: 867
Re: New F/W for GW1100 V2.3.2
« Reply #6 on: April 29, 2024, 05:34:59 AM »
This new f/w has the WS85 but nowhere can I find the updated documentation with the details for this device. It's about time Ecowitt made the updates available on a timely basis so things like CumulusMX do not throw errors on the new f/w because of missing information. Does anyone have the updated documentation yet? This also affects the GW1200 and its new f/w.

Stuart
Logged
Ecowitt GW1003 with ultrasonic wind gauge, lightning sensor and PM2.5 sensor with Personal Weather Tablet as a console.

Offline meteobreda

  • Member
  • *
  • Posts: 8
Re: New F/W for GW1100 V2.3.2
« Reply #7 on: April 29, 2024, 06:40:40 AM »
Quote from: Gyvate on April 29, 2024, 05:23:58 AM
before going down that road - did you go through all the options shown in the How to connect to WiFi thread https://www.wxforum.net/index.php?topic=41575.0 respectively the WiKi http://meshka.eu/Ecowitt/dokuwiki/doku.php?id=start#how_to_connect_pair_your_console_gateway_to_your_router
I can't see the WiFi of gw1100.
I think the gw1100 have some problem, because this I'm interested to load firmware by wires

Best regards
Logged

Offline Gyvate

  • Forecaster
  • *****
  • Posts: 3392
Re: New F/W for GW1100 V2.3.2
« Reply #8 on: April 29, 2024, 06:44:21 AM »
Quote from: broadstairs on April 29, 2024, 05:34:59 AM
This new f/w has the WS85 but nowhere can I find the updated documentation with the details for this device. It's about time Ecowitt made the updates available on a timely basis so things like CumulusMX do not throw errors on the new f/w because of missing information. Does anyone have the updated documentation yet? This also affects the GW1200 and its new f/w.

Stuart
yep, could .... should ....
try http://meshka.eu/Ecowitt/dokuwiki/doku.php?id=start#c_retrieval_of_sensor_data_from_the_local_network_via_http_call_local_http_api
Logged
WS2350 1.6.7, GW1000(3) 1.7.7,WH2650 WiFi (2) 1.7.7 (test/backup), GW1100 2.3.1, GW2000(3) 3.1.1, HP2551 1.9.5,5.1.5;HP3500 1.7.2,WS3800 1.2.8, WN1910 1.2.3,WN1980 1.2.3;
Ecowitt WS90(2)1.3.5/1.4.0, WS80(2)1.2.5, WS68, WS69, WH40, WH31, WH31-EP, WN30, WN34L, WN35, WH32, WH32-EP, WH32B, WH57 [Lightning], WH41 [PM2.5], WH51, WH45, WH55
MeteobridgePro(2)[test,prod] 5.8 Mar 01 2024, 15185 - Blake-Larsen Sun Recorder - RPi4/weewx 4.8.0/4.10.2/CumulusMX 3283/Meteobridge RPi4B-2GB,
Barani Meteoshield Pro, MetSpec Rad02
weather landing page: http://meshka.eu
WIKI http://meshka.eu/Ecowitt/dokuwiki

Offline Gyvate

  • Forecaster
  • *****
  • Posts: 3392
Re: New F/W for GW1100 V2.3.2
« Reply #9 on: April 29, 2024, 06:52:01 AM »
Quote from: meteobreda on April 29, 2024, 06:40:40 AM
Quote from: Gyvate on April 29, 2024, 05:23:58 AM
before going down that road - did you go through all the options shown in the How to connect to WiFi thread https://www.wxforum.net/index.php?topic=41575.0 respectively the WiKi http://meshka.eu/Ecowitt/dokuwiki/doku.php?id=start#how_to_connect_pair_your_console_gateway_to_your_router
I can't see the WiFi of gw1100.
I think the gw1100 have some problem, because this I'm interested to load firmware by wires

Best regards
are you aware of what you say ?
have you even made yourself familiar with the device - use the WiKi !! http://meshka.eu/Ecowitt/dokuwiki
the GW1100 is a WiFi only device - there is no such thing like loading firmware "by wires"

When the WLAN of the GW1100 (it's access point has the SSID GW1100x-WFInnn) respectively its SSID is not visible, you have to factory reset the piece. Look up and study the GW1100 and firmware sections in the WiKi

How will you use it in the first place if it is not WiFi connected ?

When it is connected it has an IP and the WebUi can be accessed via a web browser. The router will know its IP.
Without a WiFi connection it cannot post to the local network or internet - you cannot reach it via browser nor app.
And cannot get its firmware updated either.
Logged
WS2350 1.6.7, GW1000(3) 1.7.7,WH2650 WiFi (2) 1.7.7 (test/backup), GW1100 2.3.1, GW2000(3) 3.1.1, HP2551 1.9.5,5.1.5;HP3500 1.7.2,WS3800 1.2.8, WN1910 1.2.3,WN1980 1.2.3;
Ecowitt WS90(2)1.3.5/1.4.0, WS80(2)1.2.5, WS68, WS69, WH40, WH31, WH31-EP, WN30, WN34L, WN35, WH32, WH32-EP, WH32B, WH57 [Lightning], WH41 [PM2.5], WH51, WH45, WH55
MeteobridgePro(2)[test,prod] 5.8 Mar 01 2024, 15185 - Blake-Larsen Sun Recorder - RPi4/weewx 4.8.0/4.10.2/CumulusMX 3283/Meteobridge RPi4B-2GB,
Barani Meteoshield Pro, MetSpec Rad02
weather landing page: http://meshka.eu
WIKI http://meshka.eu/Ecowitt/dokuwiki

Offline meteobreda

  • Member
  • *
  • Posts: 8
Re: New F/W for GW1100 V2.3.2
« Reply #10 on: April 29, 2024, 07:19:49 AM »
The gw1100 is an esp8266, if I find how to connect the cables I can program it like any other esp.
I think
Logged

Offline Gyvate

  • Forecaster
  • *****
  • Posts: 3392
Re: New F/W for GW1100 V2.3.2
« Reply #11 on: April 29, 2024, 07:39:21 AM »
apart from the fact that the GW1100 IS not a ESP8226 but HAS a ESP8226 on its PCB, you are unlikely to find someone here to help you in your tinkering attempts. This is not so much of a low level hardware forum here, but more average user oriented.
If you still find someone here, you are lucky.

And if you figure out how to do this, feel free to share the approach, best with a few pictures, here.
Logged
WS2350 1.6.7, GW1000(3) 1.7.7,WH2650 WiFi (2) 1.7.7 (test/backup), GW1100 2.3.1, GW2000(3) 3.1.1, HP2551 1.9.5,5.1.5;HP3500 1.7.2,WS3800 1.2.8, WN1910 1.2.3,WN1980 1.2.3;
Ecowitt WS90(2)1.3.5/1.4.0, WS80(2)1.2.5, WS68, WS69, WH40, WH31, WH31-EP, WN30, WN34L, WN35, WH32, WH32-EP, WH32B, WH57 [Lightning], WH41 [PM2.5], WH51, WH45, WH55
MeteobridgePro(2)[test,prod] 5.8 Mar 01 2024, 15185 - Blake-Larsen Sun Recorder - RPi4/weewx 4.8.0/4.10.2/CumulusMX 3283/Meteobridge RPi4B-2GB,
Barani Meteoshield Pro, MetSpec Rad02
weather landing page: http://meshka.eu
WIKI http://meshka.eu/Ecowitt/dokuwiki
Pages: [1]   Go Up
« previous next »