Hi All,
Thank you all for sticking with me with my issue.
Finally got a chance to take the system cabling out with only the power attached.
With the display on the signal level was a S-9 on my radio.
When the display went off the signal level went down to a S-5, which is probably coming form other sources outside or within my house, which is the norm for this testing.
Next connected the GPS, no change with the signal level.
Next connected the modem/router, no change with the signal level.
Next connected the H antenna to amp 1, the interference came on at about a S-8.
Disconnected the H antenna and connected the E antenna to amp 2, signal level dropped to S-5.
Moved the E antenna to amp 1, system did not like that but the signal level stayed a S-5.
Then put the E antenna to amp 2 and put the H antenna to amp 1, the interference came back on.
Looks like the culprit is the H antenna is the issue. So have that off for now and will have to go the roof where the H field antenna is located and check on the amplifier in the box of the the ferrite core loops are located.
Attached is what I have the settings for both amplifiers.
[ You are not allowed to view attachments ]
Hope all this makes sense.
Thank again for all of your inputs.
Will see what I can do with the H field antenna system.
Aloha,
--Stan Y.
KH6HHG
Maui, Hawaii