Author Topic: Arduino receiver for Acurite 5-in-1, tower, and maybe lightning sensors  (Read 31903 times)

0 Members and 2 Guests are viewing this topic.

Offline joegr

  • Senior Member
  • **
  • Posts: 57
I made a little Arduino based receiver to replace the obsoleted Acurite smart hub.  I mainly did this because I needed a way to get the data from the sensor(s) into my home automation.  However, I did set it up to send data to Weather Underground too.

https://github.com/joegr123/WeatherStation

Offline Bushman

  • Forecaster
  • *****
  • Posts: 7549
    • Eagle Bay Weather
That;s great!  I also note one of the links shows the Raspberry Pi build!!! 
Need low cost IP monitoring?  http://wirelesstag.net/wta.aspx?link=NisJxz6FhUa4V67/cwCRWA or PM me for 50% off Wirelesstags!!

Offline Lagares

  • Member
  • *
  • Posts: 1
Fits any Acurite monitor? I have a 01035 model station.

Offline mangus580

  • Member
  • *
  • Posts: 4
Re: Arduino receiver for Acurite 5-in-1, tower, and maybe lightning sensors
« Reply #3 on: November 23, 2020, 03:37:36 PM »
I made a little Arduino based receiver to replace the obsoleted Acurite smart hub.  I mainly did this because I needed a way to get the data from the sensor(s) into my home automation.  However, I did set it up to send data to Weather Underground too.

https://github.com/joegr123/WeatherStation

I am having some difficulties making it work....  Are you available to help troubleshoot?  I am guessing I am missing something simple....

Offline joegr

  • Senior Member
  • **
  • Posts: 57
Re: Arduino receiver for Acurite 5-in-1, tower, and maybe lightning sensors
« Reply #4 on: January 05, 2021, 05:27:24 PM »
I guess that depends on what you mean by available.  I can answer some questions back and forth via email.

Offline mangus580

  • Member
  • *
  • Posts: 4
Re: Arduino receiver for Acurite 5-in-1, tower, and maybe lightning sensors
« Reply #5 on: January 05, 2021, 07:26:59 PM »
It would work for me...  I could also do facebook messenger, and google hangouts too if either of those work.  Send me your email address (use a private message if you prefer to not post it public)

Thanks! 

I figure I am missing something simple, knowing my track record with things LOL

Offline mangus580

  • Member
  • *
  • Posts: 4
Re: Arduino receiver for Acurite 5-in-1, tower, and maybe lightning sensors
« Reply #6 on: January 05, 2021, 11:38:41 PM »
Thanks Joe for the quick help!  Solved my issue, and it works great now!

Just to document for anyone needing it in the future....

In the D_Interrupts file, locate:

Code: [Select]
void handler()
and change it to:

Code: [Select]
void IRAM_ATTR handler()
Joe stated that something was changed in the Arduino IDE that requires this modification.

Thanks again Joe!!

Offline mangus580

  • Member
  • *
  • Posts: 4
Re: Arduino receiver for Acurite 5-in-1, tower, and maybe lightning sensors
« Reply #7 on: January 12, 2021, 11:38:48 AM »
Another update....  Some library changes have effected the code for the BMP280.  If you want to use a BMP280 with this, you need to find and comment out the following lines:

Code: [Select]
digitalWrite(LED_BUILTIN, !bitState);    - in D_Interrupts

digitalWrite(LED_BUILTIN, HIGH); // start with LED off   - E_Setup
pinMode(LED_BUILTIN, OUTPUT); // LED output   - E_Setup