Hi!
Obvious, is can you remove batteries from the other WH31 and see if the newer one snaps in?
Unfortunately it stays the same.
Do all your consoles report the same (and identical) ID for your WH31/WN30 sensors ?
Yes, all 3 GW1x00 report the same channels & IDs.
Reregistering does not change the IDs for the WH31/WN30 ...
But as I said at the beginning, the same ID doesn't have to be a problem. I think the WN30 generally has a technical problem.
It worked for several months without any problems until last Sunday it simply stopped sending and only occasionally displayed any blocks on the LCD.
The LCD display works again after changing the battery. The batteries were still at 1.47V each.
But it only sends shortly after activation. And although it continues to show a temperature, it no longer changes.
In order to display the sensor's LCD at all, however, the batteries must be out at least 2-3 minutes before being reinserted. Otherwise the display does not show anything either.
However, I absolutely cannot explain what could be causing this problem. Even if I wanted to create the problem myself, I can't find a way!
Hence the question of whether you also have sensors on different channels but with the same ID. That was the only abnormality so far.
I have to take a look right away to see if there is a capacitor ...
Oliver