This is the only section in the console that has to do with setting the stations.
I was originally just going to do wind readings and told i just needed an anny, a wireless transmitter, and console or other equipment to read the data and display it on a computer or the app.
The only reason i decided to just get the complete station is because it was more economical to do it that way.
The console has the ability to receive from 8 different transmitters or 8 different channels 1-8 to choose from. The transmitters are all the same and just need to be set to to the same channel as on the console. The transmitter that came with the station is by default set to channel 1. In the event someone else nearby is using that channel you can select anyone of the other 7 channels for example channel 2. Or if you have additional transmitters you can assign them to one of the other channels.
All i did was set the transmitter on the anny to channel 2 and set it to channel 2 on the console because in the future when i want to set up the remainder of the system which is by default set to channel 1 i don’t have to change anything.
I guess i am still a bit confused on what you are implying to just do.
Have 2 transmitters running although i just need 1 for now? It will only work if i use the transmitter that came with the complete weather station, even though i was told i need not an entire weather station to just monitor wind? Switch the transmitter over to channel 1 the factory default, but what if a neighbor is already using channel 1, thats one of the reasons you can choose another channel as i did.
What am i missing here or is the firmware wonky.