WXforum.net
Weather Software => VP Tools (Virtual VP, VP Live, and VP Tools) => Topic started by: Guillaume_67370 on August 18, 2021, 03:07:26 PM
-
Hello
I try to download again virtual vp but link softwx.com is no more available
http://www.softwx.com/weather/virtualvp/virtualvp1.2.4.zip
Please Can you help me
Thanks a lot
-
Looks like you can get v1.2.5 from the wayback machine: https://web.archive.org/web/20190409094944/http://softwx.com/weather/virtualvp/VirtualVPSetup-1.2.5.exe
-
Keep in mind that VirtualVP only works with the old Davis loggers (no 'green dot') and VP1 systems. VP2 systems with new Davis loggers will not work.
-
Do you have the registration key ? If not it's
Serial # 99991
Registration G8JW-JC7V-MBGZ
Works great with a serial and original usb logger as well a WiFi logger. I also use it to send the data over my inhouse network (Ethernet over power lines) to a back office pc. VP2 systems with Consoles/or Envoys with the above mentioned loggers work fine.
-
Do you have the registration key ? If not it's
Serial # 99991
Registration G8JW-JC7V-MBGZ
Works great with a serial and original usb logger as well a WiFi logger. I also use it to send the data over my inhouse network (Ethernet over power lines) to a back office pc. VP2 systems with Consoles/or Envoys with the above mentioned loggers work fine.
Hello
Thanks a lot ;)
Another question i'm using Windows 10 Family 64 bits and i also need to create virtual COM port for another software
Can you please send the driver i need to install ?
Thanks a lot for your great help
-
You will need VSPE or Virtual Serial Port Emulator. The cost for this is only $24.95.
There are some free ones but some are only 32 bit and one I tried years ago is no longer supported. If you get VPSE I will send you my config file that will help jump start your set up.
http://www.eterlogic.com/Products.VSPE.html
-
You will need VSPE or Virtual Serial Port Emulator. The cost for this is only $24.95.
There are some free ones but some are only 32 bit and one I tried years ago is no longer supported. If you get VPSE I will send you my config file that will help jump start your set up.
http://www.eterlogic.com/Products.VSPE.html
ok i get VPSE thanks
please could you now send my how i can make the configuration
Thanks a lot for your great help :grin:
-
Are there other software programs to run WD and Weatherlink together?
-
Hello,
My hard drive recently crash and I trying to get Virtual Vp back up running again and I just just VSPE running again and downloaded Virtual Vp but it seems to not like this key listed below it excepts says it was successful it but then stills says trial expired and it won't connect at all my settings are just like Garth's listed above. I using the same data logger that worked before. Any suggestions to fix this. Do you have the registration key ? If not it's
Serial # 99991
Registration G8JW-JC7V-MBGZ
Works great with a serial and original usb logger as well a WiFi logger. I also use it to send the data over my inhouse network (Ethernet over power lines) to a back office pc. VP2 systems with Consoles/or Envoys with the above mentioned loggers work fine.
Hello
Thanks a lot ;)
Another question i'm using Windows 10 Family 64 bits and i also need to create virtual COM port for another software
Can you please send the driver i need to install ?
Thanks a lot for your great help
Jeanette
UPDATE: Once I ran Virtual Vp as administrator It finally allowed the Registration to work so it is now working properly again :grin:
-
...
UPDATE: Once I ran Virtual Vp as administrator It finally allowed the Registration to work so it is now working properly again :grin:
THE key to solving this problem!