Topic: WittBoy = GW2001 (station) = WS90 + GW2000 on Kickstarter & Beta test

[giusCB]

The led stay on for about 15-20 seconds
But.. No, not solved. 1.8 kmh always present

[Gyvate]

then maybe report to Ecowitt ...
see what they have to offer ...

[giusCB]

then maybe report to Ecowitt ...
see what they have to offer ...

Ok yes, not a big problem but this is a bug

[Aircub]

Could someone explain this to me. All day we have had strong winds and I consider the Wittboy to be pretty accurate on direction and speed. However the temp profile suddenly changed at exactly 12pm. The feel like temperature became the same as the real temp, and if anything should have gone lower, until 7:50pm when it jumped back down. Is this a bug 

[mcrossley]

Could someone explain this to me. All day we have had strong winds and I consider the Wittboy to be pretty accurate on direction and speed. However the temp profile suddenly changed at exactly 12pm. The feel like temperature became the same as the real temp, and if anything should have gone lower, until 7:50pm when it jumped back down. Is this a bug 

I think their feels like is just wind chill which only applies below 50 °F, or 10 °C

[Aircub]

Could someone explain this to me. All day we have had strong winds and I consider the Wittboy to be pretty accurate on direction and speed. However the temp profile suddenly changed at exactly 12pm. The feel like temperature became the same as the real temp, and if anything should have gone lower, until 7:50pm when it jumped back down. Is this a bug 

I think their feels like is just wind chill which only applies below 50 °F, or 10 °C

Looks like you are right, it stopped when temp above 10C and back on again when it dropped below. Thanks for that.

[saratogaWX]

Just watching this thread for notification anomalies

[giusCB]

new fw. upgrade https://foue.omnicamp1.com/link/624e3f9dd342a10020629a28/624e3f831761c6001e15ff02/60fe8857b211cd7ebb5ab8f2?signature=cc59e01b718a79b294b6eb140c6806da238a53bc37431e1702d7b4c1fede9d56

" The main change is to improve rain detection stability by implementing a new algorithm in gauging rain fall pattern with the resistance change behavior.  it is not a must, but it is helpful in avoiding some unexpected rain due to high humid conditions.  A PC running windows will be needed to complete the upgrade process. The new firmware as well as all needed tools can be found in the link "

report your feedback publicy to all user 

[olicat]

Hi!

new fw. upgrade https://foue.omnicamp1.com/link/624e3f9dd342a10020629a28/624e3f831761c6001e15ff02/60fe8857b211cd7ebb5ab8f2?signature=cc59e01b718a79b294b6eb140c6806da238a53bc37431e1702d7b4c1fede9d56

Thanks for sharing.
Where did you find this information?

Oliver

[giusCB]

Hi!

new fw. upgrade https://foue.omnicamp1.com/link/624e3f9dd342a10020629a28/624e3f831761c6001e15ff02/60fe8857b211cd7ebb5ab8f2?signature=cc59e01b718a79b294b6eb140c6806da238a53bc37431e1702d7b4c1fede9d56

Thanks for sharing.
Where did you find this information?

Oliver

From customer service

[Aircub]

Hi!

new fw. upgrade https://foue.omnicamp1.com/link/624e3f9dd342a10020629a28/624e3f831761c6001e15ff02/60fe8857b211cd7ebb5ab8f2?signature=cc59e01b718a79b294b6eb140c6806da238a53bc37431e1702d7b4c1fede9d56

Thanks for sharing.
Where did you find this information?

Oliver

From customer service

What Firmware version number is this upgrade?

[olicat]

Hi!

What Firmware version number is this upgrade?

It is v1.17 or 117 for the WS90.

Oliver

[Aircub]

Hi!

What Firmware version number is this upgrade?

It is v1.17 or 117 for the WS90.

Oliver

I have V2.1.3 for the GW2000A but how do I find the Firmware version for the Wittboy?

[olicat]

Hi!

how do I find the Firmware version for the Wittboy?

I don't know if there is an official way. But at least the WS90 sends the version number via custom server. You could check there. If you want it easy: ear.phantasoft.de.

Oliver

[giusCB]

Hi!

how do I find the Firmware version for the Wittboy?

I don't know if there is an official way. But at least the WS90 sends the version number via custom server. You could check there. If you want it easy: ear.phantasoft.de.

Oliver

Wich version? The outdoor sensor or the fw. of the gw2000?

[olicat]

Hi!

The firmware version for the station is shown in WS View. For the WS90 I don't know yet if it is shown somewhere. I still await my parcel.
But I know for sure that both version numbers are transmitted via custom server. EAR shows all fields sent through custom server and also checks the version numbers and gives some advices.

Oliver

[giusCB]

Hi!

The firmware version for the station is shown in WS View. For the WS90 I don't know yet if it is shown somewhere. I still await my parcel.
But I know for sure that both version numbers are transmitted via custom server. EAR shows all fields sent through custom server and also checks the version numbers and gives some advices.

Oliver

I'll try asap

[Aircub]

Hi!

The firmware version for the station is shown in WS View. For the WS90 I don't know yet if it is shown somewhere. I still await my parcel.
But I know for sure that both version numbers are transmitted via custom server. EAR shows all fields sent through custom server and also checks the version numbers and gives some advices.

Oliver

Where is it shown in WSView, all I can see is the firmware version of the GW2000A

[Gyvate]

Hi!

The firmware version for the station is shown in WS View. For the WS90 I don't know yet if it is shown somewhere. I still await my parcel.
But I know for sure that both version numbers are transmitted via custom server. EAR shows all fields sent through custom server and also checks the version numbers and gives some advices.

Oliver

Where is it shown in WSView, all I can see is the firmware version of the GW2000A

@Aircub
no sensor firmware in WS View (Plus)
for the WS90 you have to use Oliver's EAR setup - follow the link - EAR in his message is a link !
You connect your GW2000 via custom server to his test site (all described) and can see the results of the custom server postings. Not just the string but also nicely structured on his page !
Give it a try !

[hiljo]

I checked my custom server output, but there is no FW version of the sensors available:

Code: [Select]

  'PASSKEY' => 'EB43A04EDF1C20BC05D596413D31148B',
  'stationtype' => 'GW2000A_V2.1.3',
  'runtime' => '1522',
  'dateutc' => '2022-04-07 10:10:06',
  'freq' => '868M',
  'model' => 'GW2000A',

Only the firmware version of the console or gateway (WS2000 FW version 2.1.3 in my case)..

[olicat]

Hi!

At least with firmware v2.1.1 for GW2000 there was also a key "ws90_ver" which - obviously - contained the firmware version of the WS90.
Did you not look carefully or did they change that with v2.1.3?

Oliver

[hiljo]

At least with firmware v2.1.1 for GW2000 there was also a key "ws90_ver" which - obviously - contained the firmware version of the WS90.
Did you not look carefully or did they change that with v2.1.3?

My complete output of the custom server upload:

Code: [Select]

array (
  'PASSKEY' => 'EB43A04EDF1C20BC05D596413D31148B',
  'stationtype' => 'GW2000A_V2.1.3',
  'runtime' => '3316',
  'dateutc' => '2022-04-07 10:40:00',
  'tempinf' => '74.1',
  'humidityin' => '35',
  'baromrelin' => '28.916',
  'baromabsin' => '28.871',
  'tempf' => '47.5',
  'humidity' => '84',
  'winddir' => '203',
  'windspeedmph' => '4.25',
  'windgustmph' => '12.97',
  'maxdailygust' => '27.96',
  'solarradiation' => '176.87',
  'uv' => '1',
  'rainratein' => '0.094',
  'eventrainin' => '0.020',
  'hourlyrainin' => '0.020',
  'dailyrainin' => '0.496',
  'weeklyrainin' => '1.528',
  'monthlyrainin' => '1.555',
  'yearlyrainin' => '9.752',
  'rrain_piezo' => '0.142',
  'erain_piezo' => '0.024',
  'hrain_piezo' => '0.024',
  'drain_piezo' => '0.500',
  'wrain_piezo' => '1.531',
  'mrain_piezo' => '1.559',
  'yrain_piezo' => '9.756',
  'temp1f' => '50.2',
  'humidity1' => '76',
  'temp2f' => '49.8',
  'humidity2' => '84',
  'soilmoisture1' => '60',
  'pm25_ch1' => '0.0',
  'pm25_avg_24h_ch1' => '0.0',
  'lightning_num' => '0',
  'lightning' => '',
  'lightning_time' => '',
  'tf_ch1' => '47.7',
  'leafwetness_ch1' => '95',
  'wh26batt' => '0',
  'batt1' => '0',
  'batt2' => '0',
  'soilbatt1' => '1.4',
  'pm25batt1' => '3',
  'wh57batt' => '3',
  'tf_batt1' => '1.44',
  'leaf_batt1' => '1.48',
  'wh90batt' => '3.28',
  'freq' => '868M',
  'model' => 'GW2000A',
)

I can only say that i have a beta version of the WS90 offcourse and indeed V2.1.3 of the GW2000 firmware..

[olicat]

Hi!

In your output I miss also all the WS90 gain-keys, the ws90cap_volt and the rfdata-key.
I can not imagine that all these keys have been abolished with the current firmware version.  How did you create this list?

In fact, unfortunately no one has contacted EAR with v2.1.3 yet. Therefore I have no comparative data

Oliver

[giusCB]

Hi!

The firmware version for the station is shown in WS View. For the WS90 I don't know yet if it is shown somewhere. I still await my parcel.
But I know for sure that both version numbers are transmitted via custom server. EAR shows all fields sent through custom server and also checks the version numbers and gives some advices.

Oliver

Here is the output  [ You are not allowed to view attachments ]

I see only the fw. of gw2000 

[hiljo]

In your output I miss also all the WS90 gain-keys, the ws90cap_volt and the rfdata-key.
I can not imagine that all these keys have been abolished with the current firmware version.  How did you create this list?

Exporting a var_dump of $_POST into a file. So it's the raw data of the content that my GW2000 posts.

In fact, unfortunately no one has contacted EAR with v2.1.3 yet. Therefore I have no comparative data.

I'm not at home currently, so I cannot change it temporary to EAR for your info
Could it be that my device is beta? And therefore the vars are not submitted?