Author Topic: Meteo Shield Standard  (Read 664 times)

0 Members and 1 Guest are viewing this topic.

Offline Marty

  • Member
  • *
  • Posts: 23
Meteo Shield Standard
« on: July 17, 2021, 05:26:47 PM »
As title stated Meteo Shield standard bigger on the inside fits all acurite/ecowitt  sensors inside 
85$  + shipping like new painted flat black on inside
paypal ready Norther New Jersey

20210717_135332 by Marcin Madry, on Flickr

Offline eliteweathernz

  • Weather Enthusiast/ Weather Equipment Support
  • Contributor
  • ***
  • Posts: 109
Re: Meteo Shield Standard
« Reply #1 on: July 19, 2021, 05:03:21 AM »
Are you just shipping within the US??

Offline galfert

  • Global Moderator
  • Forecaster
  • *****
  • Posts: 6822
Re: Meteo Shield Standard
« Reply #2 on: July 19, 2021, 10:32:17 AM »
Sorry to go off topic but I really like your mounting post. Seems like you used a white fence post. I've seen those types of fences before but I'm not familiar with the material. Is it wood or some plastic composite? I'm wondering what your experience is with this mounting solution. Would you recommend it? Would you do it again? I'm concerned that if it is some plastic composite that it might radiate as heat absorption will be higher than if it were wood. Could this affect your temperature sensors? Maybe it is painted wood? It does look really nice though.

Picture attached below for other forum user reference
 [ You are not allowed to view attachments ]
« Last Edit: July 19, 2021, 10:35:31 AM by galfert »
Ecowitt GW1000 | Meteobridge on Raspberry Pi
WU: KFLWINTE111  |  PWSweather: KFLWINTE111
CWOP: FW3708  |  AWEKAS: 14814
Windy: pws-f075acbe
Weather Underground Issue Tracking
Tele-Pole

Offline hmderek

  • Contributor
  • ***
  • Posts: 124
    • Meteodrenthe
Re: Meteo Shield Standard
« Reply #3 on: July 20, 2021, 04:21:35 AM »
You are right, that is a nice mounting solution.  :grin:
Davis VP2
Davis WeatherLink
Sensirion SHT35
PT100
NTC Thermistors
DS18B20
Apogee Instruments TS-100
Barani Meteoshield Pro
Davis 7714
MetSpec RAD14
Davis AirLink
Wemos D1 Mini micro controllers
https://blog.meteodrenthe.nl
https://meteodrenthe.nl

Offline ivano

  • Senior Contributor
  • ****
  • Posts: 201
    • http://www.supermeteo.com/stazione/ortelle/
Re: Meteo Shield Standard
« Reply #4 on: July 20, 2021, 07:12:45 AM »
Sorry to go off topic but I really like your mounting post. Seems like you used a white fence post. I've seen those types of fences before but I'm not familiar with the material. Is it wood or some plastic composite? I'm wondering what your experience is with this mounting solution. Would you recommend it? Would you do it again? I'm concerned that if it is some plastic composite that it might radiate as heat absorption will be higher than if it were wood. Could this affect your temperature sensors? Maybe it is painted wood? It does look really nice though.

Picture attached below for other forum user reference
 [ You are not allowed to view attachments ]
very nice installation, even if to find the nit, the two screens should be oriented in the same way, to avoid any shadows,
1)3 gw1000
2)hp2551
3)ws80
4)ws68
5)2 wh32 EP
6)5 wh31 EP
7)2 meteoschield pro
8)schermo lastem LSI
9) davis 7714
10)wh40
11)schermo solare RAD-14 Metspec
12)schermo solare RAD-02 Metspec
13)Meteorain 200 compact (Barani)
14)davis ventilato h24
15) Davis vp2 pro ventilata
16) GW1001 ecowitt
17) Wittboy ecowitt
template http://ortellemeteo.altervista.org/pwsd/
webcam :https://rtsp.me/embed/tRhazi3z/
http://www.supermeteo.com/stazione/ortelle/

Offline Marty

  • Member
  • *
  • Posts: 23
Re: Meteo Shield Standard
« Reply #5 on: July 20, 2021, 09:31:54 PM »
Material is vinyl   ,  used as fence here in the states  ,  had basic wood before didnt' see any temperature fluctuations only very humid in my location  and very good at radiation nights  , low elevation and lack of mixing,  had all kinds of different setups and this one meets my eye for sure ...  performs really good vp2 is painted flat black on the inside so is  davis 7714 , all within .1 of each other 7714 slow to respond a little... hate to get rid of barani stuff they work about the same did some testing but i can't have any more bee hives in my back yard you know  [tup]   

Offline Marty

  • Member
  • *
  • Posts: 23
Re: Meteo Shield Standard
« Reply #6 on: July 20, 2021, 09:52:51 PM »
bump
« Last Edit: July 21, 2021, 10:58:55 PM by Marty »

Offline Marty

  • Member
  • *
  • Posts: 23
Re: Meteo Shield Standard
« Reply #7 on: July 20, 2021, 09:57:38 PM »
bump
« Last Edit: July 21, 2021, 10:58:43 PM by Marty »

Offline tedroche

  • Member
  • *
  • Posts: 13
    • Contoocook Village North
Re: Meteo Shield Standard
« Reply #8 on: September 03, 2021, 07:00:49 AM »
*nudge* still available? :?:
Ecowitt GW1000, HP3501 WH32B WH32E WH31 WH41 WH40B WS68BN
WeeWx Seasons on Ubuntu/MariaDB Web site
WU: KNHHOPKI09 CWOP: GW0103 and WOW
CoCoRaHS: NH-MR-68 PWSWeather

 

anything