WXforum.net

Miscellaneous Debris => For Sale/Wanted => Topic started by: Marty on July 17, 2021, 05:26:47 PM

Title: Meteo Shield Standard
Post by: Marty on July 17, 2021, 05:26:47 PM
As title stated Meteo Shield standard bigger on the inside fits all acurite/ecowitt  sensors inside 
85$  + shipping like new painted flat black on inside
paypal ready Norther New Jersey

(https://live.staticflickr.com/65535/51318798605_4c332940f0.jpg) (https://flic.kr/p/2mbSfUv)20210717_135332 (https://flic.kr/p/2mbSfUv) by Marcin Madry (https://www.flickr.com/photos/lysawy/), on Flickr
Title: Re: Meteo Shield Standard
Post by: eliteweathernz on July 19, 2021, 05:03:21 AM
Are you just shipping within the US??
Title: Re: Meteo Shield Standard
Post by: galfert on July 19, 2021, 10:32:17 AM
Sorry to go off topic but I really like your mounting post. Seems like you used a white fence post. I've seen those types of fences before but I'm not familiar with the material. Is it wood or some plastic composite? I'm wondering what your experience is with this mounting solution. Would you recommend it? Would you do it again? I'm concerned that if it is some plastic composite that it might radiate as heat absorption will be higher than if it were wood. Could this affect your temperature sensors? Maybe it is painted wood? It does look really nice though.

Picture attached below for other forum user reference
 [ You are not allowed to view attachments ]
Title: Re: Meteo Shield Standard
Post by: hmderek on July 20, 2021, 04:21:35 AM
You are right, that is a nice mounting solution.  :grin:
Title: Re: Meteo Shield Standard
Post by: ivano on July 20, 2021, 07:12:45 AM
Sorry to go off topic but I really like your mounting post. Seems like you used a white fence post. I've seen those types of fences before but I'm not familiar with the material. Is it wood or some plastic composite? I'm wondering what your experience is with this mounting solution. Would you recommend it? Would you do it again? I'm concerned that if it is some plastic composite that it might radiate as heat absorption will be higher than if it were wood. Could this affect your temperature sensors? Maybe it is painted wood? It does look really nice though.

Picture attached below for other forum user reference
 [ You are not allowed to view attachments ]
very nice installation, even if to find the nit, the two screens should be oriented in the same way, to avoid any shadows,
Title: Re: Meteo Shield Standard
Post by: Marty on July 20, 2021, 09:31:54 PM
Material is vinyl   ,  used as fence here in the states  ,  had basic wood before didnt' see any temperature fluctuations only very humid in my location  and very good at radiation nights  , low elevation and lack of mixing,  had all kinds of different setups and this one meets my eye for sure ...  performs really good vp2 is painted flat black on the inside so is  davis 7714 , all within .1 of each other 7714 slow to respond a little... hate to get rid of barani stuff they work about the same did some testing but i can't have any more bee hives in my back yard you know  [tup]   
Title: Re: Meteo Shield Standard
Post by: Marty on July 20, 2021, 09:52:51 PM
bump
Title: Re: Meteo Shield Standard
Post by: Marty on July 20, 2021, 09:57:38 PM
bump
Title: Re: Meteo Shield Standard
Post by: tedroche on September 03, 2021, 07:00:49 AM
*nudge* still available? :?: