WXforum.net

Weather Station Hardware => Davis Instruments Weather Stations => Topic started by: mdwx on July 16, 2020, 08:21:35 PM

Title: CWOP/ Madis giving my station F4457 Failure of L3 Spatial Consistency
Post by: mdwx on July 16, 2020, 08:21:35 PM

I've always been a bit confused by this graphic.  Which line represents the actual data from my station the blue (F4457) or red line (F4457 Analysis)?  Ok, so speed in knots are the two numbers so I'm assuming i'm getting this error regarding that difference.  Probably because it's mounted 30ft

Title: Re: CWOP/ Madis giving my station F4457 Failure of L3 Spatial Consistency
Post by: CW2274 on July 16, 2020, 08:34:08 PM

My sincere advise to you...don't care. Know and monitor your own stuff, otherwise you'll keep making these kind of post.

Title: Re: CWOP/ Madis giving my station F4457 Failure of L3 Spatial Consistency
Post by: chief-david on July 16, 2020, 08:57:06 PM

agreed

Title: Re: CWOP/ Madis giving my station F4457 Failure of L3 Spatial Consistency
Post by: mdwx on July 17, 2020, 05:36:21 PM

lol, after doing some research I concur.