Weather Station Hardware > Ambient Weather and Ecowitt and other Fine Offset clones
WN32CP Temperature Humidity Pressure sensor
Rocketman:
Just got WN32CP with my Pantech WS off eBay . Just wondered why the sensor is not listed on the Ecowitt site ?
olicat:
Hi!
This is just another name for the WH32B aka WH32 indoor.
WN and WH are sometimes used synonymously.
C = 433MHz
P = pressure
Oliver
Rocketman:
Using gw1100 this device doesn’t appear on the device list . How do I select it ?
olicat:
Hi!
Unless you cut the cable with the sensor from the GW1100, you will not be able to pair the WH32B with the GW1100.
Oliver
kheller2:
To elaborate on what Oliver said...
The GW1100 already has an indoor Temp/Hum/Pres sensor on the attached cable, so it will not use any other duplicate sensor.
[unless you cut the cable, in with case the firmware starts looking for the external one -- assuming your GW1100 is also 433MHz]
I believe there are some threads on here on how to convert the WH32 to be an outdoor sensor (minus pressure), overriding your array if need be.
Navigation
[0] Message Index
[#] Next page
Go to full version