In your first picture there are two crystals:
The 1.8432 Mhz is most likely for the microprocessor. The silver cylinder beneath it is a 32.768 KHz watch crystal feeding a RTC chip. If the display and function keys work as well as keeping time, these are good.
The second picture showing the 10.25 Mhz crystal has a 455 KHz resonator beside it, these are in the AM/FM IF circuitry. If it receives AM/FM, these are good.
If you look at the board where the rod antenna is soldered, about an inch down and on the opposite side, from there is one more crystal. Mine has no markings on it. I suspect this is the WB circuit. You might try touching it up with a soldering iron.........