Dale, thank you for the prompt reply. I had donated my 1992 model WR-25 to our local EMA, and at some point, wind readings were just random and the EMA was sending it into TWI, and they could not find anything wrong and well they finally decided it was time to take it down, it lived a happy useful 20+ years, and they asked if I wanted it back, and they did a hack job on all the cabling, and they said turned out the junction box had water in it so I was handed sensor with very to the little cable on them. so I was able to crimp a connector on the little bit of wire on the temperature-humidity sensor, and the wind sensor everything works perfectly. The rain gauge I need to rewire and that is why I was asking. so Ill get it back to a wind/dir/tmp/humidity/rain/pressure type station which is good for me and carry it out even further life. as a backup to my Campbell Scientific once I complete the move.
I am trying to get some documentation together, there used to be a gentleman that had a repository for weather station manuals and stuff and his site is no longer, so I searched groups.io and came up with nothing, so I set up a groups.io, and going to try to slowly find things like manuals, pinout on sensors, replacement parts, photographs, etc. Cause you never know when these companies are just gonna close shop.
Ron