« previous next »
Pages: [1]   Go Down

Author Topic: Is 45c an acceptable temperature for RP3 **solved**  (Read 1362 times)

0 Members and 1 Guest are viewing this topic.

Offline captgadget

  • Forecaster
  • *****
  • Posts: 359
Is 45c an acceptable temperature for RP3 **solved**
« on: July 03, 2023, 11:34:06 AM »
 :?:
« Last Edit: December 07, 2023, 03:36:56 PM by docbee »
Logged

Offline K7RMK

  • Senior Member
  • **
  • Posts: 56
    • East Wilson Weather
Re: Is 45c an acceptable temperature for RP3
« Reply #1 on: October 09, 2023, 06:48:00 PM »
It's a bit higher than I would like. My RPI 4B sits around 38-40° C.
Logged
Ecowitt GW2000 + Meteobridge on RPI 4B
Ecowitt HP2551-C Display Console
Ecowitt WH32-EP Outdoor Temp/Humidity Sensor + MeteoShield Pro Radiation Shield
Ecowitt WS68 Anemometer
Ecowitt WH40 Rain Gauge
Ecowitt WH57 Lightning Sensor
Ecowitt WH41 Outdoor PM2.5 Air Quality Sensor
Ecowitt WH43 Indoor PM2.5 Air Quality Sensor
Ecowitt WH31 x4 Temp/Humidity Sensors
Ecowitt WH51 Soil Moisture Sensor
Ecowitt WH34S Soil Temperature Sensor
Ecowitt WN35 x2 Leaf Wetness Sensors

Offline Gyvate

  • Forecaster
  • *****
  • Posts: 3349
Re: Is 45c an acceptable temperature for RP3
« Reply #2 on: November 29, 2023, 03:43:54 AM »
mine, a RPi4B, runs on 36° C (with a temperature regulated fan though).
Logged
WS2350 1.6.7, GW1000(3) 1.7.7,WH2650 WiFi (2) 1.7.7 (test/backup), GW1100 2.3.1, GW2000(3) 3.1.1, HP2551 1.9.5,5.1.5;HP3500 1.7.2,WS3800 1.2.8, WN1910 1.2.3,WN1980 1.2.3;
Ecowitt WS90(2)1.3.5/1.4.0, WS80(2)1.2.5, WS68, WS69, WH40, WH31, WH31-EP, WN30, WN34L, WN35, WH32, WH32-EP, WH32B, WH57 [Lightning], WH41 [PM2.5], WH51, WH45, WH55
MeteobridgePro(2)[test,prod] 5.8 Mar 01 2024, 15185 - Blake-Larsen Sun Recorder - RPi4/weewx 4.8.0/4.10.2/CumulusMX 3283/Meteobridge RPi4B-2GB,
Barani Meteoshield Pro, MetSpec Rad02
weather landing page: http://meshka.eu
WIKI http://meshka.eu/Ecowitt/dokuwiki

Offline captgadget

  • Forecaster
  • *****
  • Posts: 359
Re: Is 45c an acceptable temperature for RP3
« Reply #3 on: November 29, 2023, 08:53:01 AM »
Guess I'm in the ball park. Mine is running around 40˚c with fan.
Logged

Offline N0NB

  • Amateur weather observer
  • Contributor
  • ***
  • Posts: 134
    • N0NB.us
Re: Is 45c an acceptable temperature for RP3
« Reply #4 on: November 30, 2023, 01:29:10 PM »
I have an RPi 3B+ in service at a repeater site in a metal enclosure and the building is not air conditioned.  I've seen it report a CPU temp of at least 56 C/132 F.  It's been out there for three years and I have a few spares!

I opted not to have a fan as I didn't want it covered in dust and dead flies/bugs.
Logged
Pages: [1]   Go Up
« previous next »
 

anything