Topic: Ecowitt GW1000 Upload to Wunderground

[Windy Old Geezer]

I recently got an Ecowitt GW1000 Gateway with an additional WH31 which I have placed outdoors.
I have set it up with the WS View app and it is all working well and data is showing on the live section of the app on on ecowitt.net.

I have registered it with Wunderground and all that show up is the pressure. I know that Wunderground ignores indoor temperature but surely I can get Wunderground to display outdoor temperature and humidity?

Thanks

[mauro63]

I recently got an Ecowitt GW1000 Gateway with an additional WH31 which I have placed outdoors.
I have set it up with the WS View app and it is all working well and data is showing on the live section of the app on on ecowitt.net.

I have registered it with Wunderground and all that show up is the pressure. I know that Wunderground ignores indoor temperature but surely I can get Wunderground to display outdoor temperature and humidity?

Thanks

You need to use a wh32 instead of wh31
you cannot see wh31 data on Wunderground

Mauro

[Windy Old Geezer]

Ah - Ok - Many thanks

[Platokidd]

Think you need wind, rain,outside temp and pressure to show on WU

[Windy Old Geezer]

Thank you - you are indeed correct.

I have added a WH32 outside sensor as well as a rain gauge and anemometer and all is now displaying on Wundergroud!

https://www.wunderground.com/dashboard/pws/ISPALD43

[Platokidd]

Thank you - you are indeed correct.

I have added a WH32 outside sensor as well as a rain gauge and anemometer and all is now displaying on Wundergroud!

https://www.wunderground.com/dashboard/pws/ISPALD43

Yes it's working.  You may want to get a good radiation shield for the WH32 outdoor temp. Your station is showing much warmer than your neighbors.
The wh32 is very sensitive to direct sun light and/or heat from it's mounting location. Without a radiation shield you will need  good shade all the time.

[Windy Old Geezer]

Ok - thanks - I will look into that.

Thanks