Topic: Weather Underground Website Main Menu - PM2.5 Data

[galfert]

The Weather Underground Main Menu has 29 links in drop downs. Of those links 6 of them do not work. That is almost 21% of the menu links not working.

 [ You are not allowed to view attachments ]

I'm trying to find where PM2.5 data shows up from the following station that just started reporting PM2.5 to WU.
https://www.wunderground.com/dashboard/pws/KFLWINTE862

These are probably two separate issues ...but I'm not sure. I read that you can find PM2.5 in the U.S. Counties Health Map & Air Pollution Monitors, but I don't know where that is.

[galfert]

I found it:
https://www.wunderground.com/health/us/fl/winter-springs/KFLWINTE862?cm_ven=localwx_modaq

Not showing up yet though in the "NEARBY POLLUTION MONITORS". Maybe it takes a day.

 [ You are not allowed to view attachments ]

[galfert]

If anyone wants to know how to get to that for your location, start with any WU station dashboard.
Then click on the city name under the Station Name.
Then click on Air Quality and you are there.

* Your station does not need to have an air quality sensor to see this. These steps will take you to show you the nearby air quality sensors around you.

[quailvalleywx]

Thanks for the info.  From WU's data ingest protocol, https://feedback.weather.com/customer/en/portal/articles/2924682-pws-upload-protocol?b_id=17298 I saw they accept PM2.5 and PM10 data via AqPM2.5 and AqPM10.  I started sending that data a couple days ago but I don't see it listed in my city's list of nearby sensors. It looks like they just import Purple Air data at the moment. When I get a chance I'm going to add AQI data to the overlay on my webcam image - and with luck maybe WU displays webcam images, or not

There are other posts on wxforum about making your own Purple Air. This is what I did which uses the same internal sensor and an ESP8266-12f to send data via WiFi https://github.com/mrcodegh/PMS7003.

Mike.

[galfert]

Yes it seems WU is accepting my PM2.5 data but I'm not seeing it show up either in nearby sensors. It does seem like you said that for now all they are doing is receiving data from Purple Air's website.

[OldAlaskaGuy]

I have a PM2.5 sensor and am reporting to Ambient Weather. It is only for particulate matter. It does show on my station page
here: https://dashboard.ambientweather.net/dashboard
The air quality shown on WU is from the local AQMD and not my station. It uses more parameters in its calculation.
Here: https://www.wunderground.com/weather/us/ca/grass-valley/KCAGRASS150

[quailvalleywx]

I noticed that Wundermap recently? has air quality PM2.5 and PM10 data from Purple Air but PM2.5 and PM10 data sent to http://rtupdate.wunderground.com are still ignored.  Hopefully WU will start to propagate ingested air quality data but based on lack of progress on other items we still have a long wait.   

[watsonm]

An update after three years !!!

I have been sending AqPM2.5 and AqPM10 readings to  weather underground along with all my other readings and they STILL don't show.   I suspect they
are getting the data  from the purple air site   so that they are "validated".  You need a valid purple air device  MAC  to send data there!

(I use a single PMS5003 unit which cost me about 30$ so how they justify nearly 300$ for their dual unit I am not sure.)