Weather Software > VP Tools (Virtual VP, VP Live, and VP Tools)

Need help setting up Virtual VP coms

<< < (5/17) > >>

waiukuweather:
I think its working OK because you are using the TCP/IP option, and I think weatherlink might not be using the LOOP2 data when using IP data logger mode
but I could be wrong

Tazz 316:

--- Quote from: waiukuweather on January 08, 2018, 03:36:24 AM ---I think its working OK because you are using the TCP/IP option, and I think weatherlink might not be using the LOOP2 data when using IP data logger mode
but I could be wrong

--- End quote ---

Maybe so the only thing i changed was a setting in WD and the errors i was getting are gone. I had to reboot my PC (software updates) so it will be awhile before i know how long it can go. I use my PC for weather software, IP camera software and general use all while only using 35 watts of power.

Tazz 316:
7 days straight now and still going + the 5 days before a reboot. Simply put the data is there for WD, Weather-Link and Cumulus.

W3DRM is just jealous.

Thanks to all that helped! :)

W3DRM:

--- Quote from: Tazz 316 on January 14, 2018, 12:22:10 PM ---7 days straight now and still going + the 5 days before a reboot. Simply put the data is there for WD, Weather-Link and Cumulus.

W3DRM is just jealous.

Thanks to all that helped! :)
--- End quote ---

No, actually I am glad it seems to be working for you on firmware v3.x. I'm really just curious as to why since many of us, myself included, were unable to get VVP to run on v3.0 firmware when it first came out. Am wondering if Davis made some kind of change to later versions of the firmware that made it compatible but never told anyone. I may just have to try it someday when I get some free time to play with it. At least I can always go backwards to the older firmware, if necessary.

Please keep us informed if anything changes.

Stetson1:
So I am trying the same thing, Virtual VP 1.25 is setup and Cumulus is talking to it fine. I have Weather Display installed and it works if connected to the Vue console on com 5. When I configure it to use the TCP/IP that matches what Virtual VP says, it never connects, just sits there dark green. The settings in WD are pointed to the 127.0.0.1 port 5511, but it never connects. Not sure what I am missing here, Virtual VP is connected to my console and feeding Cumulus. Any help would be appreciated.

Todd

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version