WXforum.net
Weather Station Hardware => Weather Web Cams => Topic started by: cospringswx on April 30, 2018, 12:48:15 AM
-
If anyone has a version of wc7 that works with hikvisions can you post it.
Thanks,
Ryan
-
I sent you a copy.
-
Email keeps bouncing back.. Its too big to post here
-
Email keeps bouncing back.. Its too big to post here
I have never been able to get WC7 to work with my HikV cameras.
What version are you using ?
-
Here is the older version that Ryan wanted, it worked with Windows 7 and Hikvision.
I'll leave this available for download couple hours.
You still need to register after trial period this is just the zip file from moonware back in 2015. File is too large to email apparently just bounces back.
webcam 7 PRO
v1.4.0.0
https://www.valentinenebraska.net/wc7.php
-
Thanks Randy, I will give it a try.
-
Way back when...I recall that in order to get WebCam7 working the drivers from Netcam Studio were needed in some situations. I've been using WebCam7 v1.5.3.0 for several years to both capture stills (https://www.gwwilkins.org/wxwebcampagestatic4.php) (the text is added via VWS and Image Salsa) and stream live (https://www.gwwilkins.org/wxhikvision-w7.php). The live stream of course needs an open port to its host computer on my router.
-
Can not get the camera to connect. ](*,)
-
Email keeps bouncing back.. Its too big to post here
I have never been able to get WC7 to work with my HikV cameras.
What version are you using ?
What are you using for the live stream?
-
Does not even give me an option to register. It has me already registered and it is remembering my old settings. I think that is what the problem is.
-
Is there a certain file in missing to delete to start new?
-
Way back when...I recall that in order to get WebCam7 working the drivers from Netcam Studio were needed in some situations. I've been using WebCam7 v1.5.3.0 for several years to both capture stills (https://www.gwwilkins.org/wxwebcampagestatic4.php) (the text is added via VWS and Image Salsa) and stream live (https://www.gwwilkins.org/wxhikvision-w7.php). The live stream of course needs an open port to its host computer on my router.
I've tried with Netcam studio installed and still won't connect.
-
Remember if you did a clean windows install you also need for RSTP cameras, Visual C++ 2013 Redistributable (32-bit) and .NET Framework 4.5.
http://www.microsoft.com/en-us/download/details.aspx?id=40784
and https://www.microsoft.com/en-us/download/details.aspx?id=49981
-
Remember if you did a clean windows install you also need for RSTP cameras, Visual C++ 2013 Redistributable (32-bit) and .NET Framework 4.5.
http://www.microsoft.com/en-us/download/details.aspx?id=40784
and https://www.microsoft.com/en-us/download/details.aspx?id=49981
All I see is 64 and 86.
-
Ryan the X86 is 32 bit and the one that's needed.
-
Ryan the X86 is 32 bit and the one that's needed.
Appreciate it Randy. I think I got it.
-
8-)
-
Hey Thanks again.
http://www.cospringsweather.com/Hikvision1.php