I am running a Meteobridge on a RPI3B.
My Froggit weather station is submitting data to the Meteobridge and to FOSHKplugin via a GW1000/DP1500.
Approximately 2 weeks ago I updated the GW1000 firmware 1.7.2 and after to 1.7.3.
I do not update the GW1000 very often and also do not restart Meteobridge too often.
After this MB somehow looses contact with the GW1000 and is not updateing for hours or until the next MB restart.
Interestingly the FOSHKplugin gets the GW1000 data regularly, so the communication on that side seems to be alright.
I also have another GW1000 with 8 indoor temp/hum sensors. MB is sometimes loosing them, too, but sometimes not.
I have no idea what I could try to get MB working again.
This is my MB log at 21:34
setup (19.05.2022 17:01:18): use UTC stamp 2022-05-19 15:01:18 (1 tries)
database (19.05.2022 17:01:25): process started.
database (19.05.2022 17:01:28): Content of RAM database restored.
wnetd (19.05.2022 17:01:28): process started.
system (19.05.2022 17:01:28): start of logging process initiated.
logger (19.05.2022 17:01:28): can't open database: unable to open database file
logger (19.05.2022 17:01:28): data logger (version 5.4, build 2560) started.
wnetd (19.05.2022 17:01:28): send data thread started (pid:2048 tid:2050)
logger (19.05.2022 17:01:28): connect station 0 (GW1000 via TCP/IP).
logger (19.05.2022 17:01:28): connect station 1 (GW1000 via TCP/IP).
logger (19.05.2022 17:01:28): connect station 9 (System Data via Plug-in).
logger (19.05.2022 17:01:32): waiting for sensors (wind0, rain0, th0, thb0) to provide data.
logger (19.05.2022 17:01:32): services paused.
logger (19.05.2022 17:01:34): station 1 (GW1000), FW version: GW1000A_V1.7.3
logger (19.05.2022 17:01:34): station 0 (GW1000), Radio Frequency: 868 MHz
logger (19.05.2022 17:01:40): sensors are now providing data.
logger (19.05.2022 17:01:40): services started.
database (19.05.2022 17:01:45): database sync done (136 tables, 195/7304 writes).
[ You are not allowed to view attachments ]