Topic: not getting latest version SW after reboot **solved**

[Jasiu]

I want to test out the new proxy SFTP service. I have three MBs, two which are remote. For some reason, the one that's local (upon which I want to do my testing) is stuck on version 5.6. It's an Ambient Weatherbridge, but so is one of the remote boxes that loaded 5.7 successfully.

Info from the web interface:

Code: [Select]

Platform: TL-MR3020   (plus USB hub)
RAM: 29364 kB total, 3520 kB free (88% used)
SW Version: Meteobridge 5.6 (Jul 24 2023, build 15010), FW 1.4

Code: [Select]

Version Control: get newest on boot

Code: [Select]

License Key: activated (ambientweather-REDACTED)
Includes access to new releases until: 2023-12-03
Log:

Code: [Select]

setup  (01.10.2023 12:01:51): use UTC stamp 2023-10-01 16:01:51 (1 tries)
wnetd  (01.10.2023 12:02:02): process started.
system (01.10.2023 12:02:02): start of logging process initiated.
wnetd  (01.10.2023 12:02:03): send data thread started (pid:2498 tid:2500)
logger (01.10.2023 12:02:03): historical data loaded (20 records).
logger (01.10.2023 12:02:03): data logger (version 5.4, build 15010) started.
logger (01.10.2023 12:02:04): connect station 0 (Vantage via USB serial).
logger (01.10.2023 12:02:05): station 0 (Vantage), wakeup sent.
logger (01.10.2023 12:02:08): sensors are now providing data.
logger (01.10.2023 12:02:08): services started.
logger (01.10.2023 12:02:08): station 0 (Vantage), no need to update console date/time.
logger (01.10.2023 12:02:08): station 0 (Vantage), setup script executed.
logger (01.10.2023 12:02:09): station 0 (Vantage), internal logger activated.
logger (01.10.2023 12:02:09): station 0 (Vantage), syncing.
logger (01.10.2023 12:02:19): station 0 (Vantage), gettime request sent.
logger (01.10.2023 12:02:29): message above repeats 1 time.
logger (01.10.2023 12:02:29): station 0 (Vantage), no Vantage time offset.
logger (01.10.2023 12:02:29): station 0 (Vantage), eeprom request sent.
logger (01.10.2023 12:02:29): station 0 (Vantage), rain collector size 0.01 inch per tick.
logger (01.10.2023 12:02:29): station 0 (Vantage), transmitter 2 active as station type #4 "Wind".
logger (01.10.2023 12:02:29): station 0 (Vantage), transmitter 3 active as station type #0 "ISS".
logger (01.10.2023 12:02:29): station 0 (Vantage), firmware version request sent.
logger (01.10.2023 12:02:29): station 0 (Vantage), firmware version 3.15 (supports LOOP2)
logger (01.10.2023 12:02:29): station 0 (Vantage), no reading of Vantage's internal logger.
Any debugging suggestions?

[docbee]

When you send me the MAC, I can have a look: info(at)meteobridge.com

[Jasiu]

Boris verified that my MB was asking for 5.6 specifically (even though the screen displayed "newest") so I set it to ask for another version, set it immediately back to "newest" and rebooted. That cleared up whatever was going on and I now have 5.7.

Big thanks to Boris!