Topic: WittBoy GW2001 users manual

[Autofill]

Hi,

I've not been able to locate the user's manual for this product on Ecowitt's webpage.

Does anyone have a copy?

Thanks

[Gyvate]

so far there's only the quick start guide - you can find it at the end of the WiFi connection threrad:
https://www.wxforum.net/index.php?topic=41575.0

By the way - there's no manual for the GW1100 on their website either - only a quick start guide.
You could use the attached one of the GW1100 - the only technical difference to a GW1100 is the additional Ethernet interface.
(and the protruding female USB plug for power supply has been replaced by a more decent piece.)
 [ You are not allowed to view attachments ]
For the WS90 the ony description available so far is the picture show on the Wittboy page.

[kheller2]

GW1100:  https://osswww.ecowitt.net/uploads/20210628/FG-GW1100AE-ECO1%20说明书%20%20PA0902306H10%2090x110mm%20(80g书纸%20正反印刷%20订装)%20MO-5393F(1).pdf

-edit-
Gyvate, I see you posted the zip file for the GW1100. I got confused by the amount of times you used GW1100 in your response.   

[Autofill]

thanks very much for this information.

I was acutally looking more the the mounting instructions of the GW2001. My unit should be coming in this week so I'd like to prepare the site.

I read that it requires a 1 inch mounting pipe/pole, and im thinking it should have the same rules as the other weather stations, like being minimum 5 ft away from anything else, and be level (does it have a level indicator? I know it doesn;t have mechanical parts like a bucket, but I assume it still needs to level) etc. but I'm just guessing at this point without the manual.

[Gyvate]

Have look at the picture show at https://www.ecowitt.com/shop/goodsDetail/245# - it shows all you need.
You will need an external level to put it (the pole) vertically.
the diameter of the pole should be max 2.5 cm ( 1 inch) - I use a 2.3 cm pole.

The console itself can be wall-mounted.
It comes with a little round "docking pad" with three holes in it for screws and the very hub/console can be inserted into it by turning.
Similar to fixing the funnel to the rain gauge. (I'm lacking the proper technical terms - hence the paraphrasing )
It can of course also just simply sit on the table, desk etc. like a little saucer.
 [ You are not allowed to view attachments ]