WXforum.net
Weather Station Hardware => Davis Instruments Weather Stations => Topic started by: dundalkwx on July 07, 2018, 08:53:13 AM
-
Hi,
I recently bought a new Vue ISS to go with my VP2 console. I cant seem to be able to get the two of them communicating with each other though.
I have the Station ID set to 3 on the VP2 console ( Default Channel 1 is in use by another Davis station in the area )
The ID is set to 3 on the Vue itself ( confirmed by the blinking LED test )
Am I missing something here ? ](*,)
Any help appreciated !
-
Are you US or International. Both have a different broadcast signal.
-
I've just realised this !
My VP2 console says "US" and the Vue is a UK version !!
I'm based in Ireland, my VP2 must be an american import, I bought it from an enthusiast a few years ago and its worked fine until the VP2 ISS started having issues.
I guess I'll have to speak to ProData about returning this Vue and getting a VP2 ISS or getting the Vue Console :(
-
Check wifilogger thread. I'm not up on it but there may be a work around.
-
You should be able to switch the console to EU frequencies. The US/EU consoles *should* be interchangeable.
You need to hook up a serial terminal to the console and issue a few commands then reset the console.
TST 1
BAND 1
DOMAIN 2
TST 0
-
Hmm 🤔
I'll give that a go now!
Just use putty or hyperterminal?
-
:grin: :grin: :grin: :grin: :grin: :grin:
THANK YOU VERY MUCH !
That worked a treat, what a great community you have here.