. . . shortened . . .
So, as I see it now, the Setup:WeatherLink Network menu item is greyed out, as is Setup:Network Upload (on if checked).
It will NOT work if you have NO mark at the bottom "Setup" setting "Network upload on . . "
It needs to be checked as without a valid network connection to the internet, uploads to 'whatever' are impossible.
I am not sure, if that is your problem.
But I tried another way. Leave the logger connected to the MB
In WLfW just use Serial for a few minutes (although there is nothing connected by serial):
"Setup" => "communications port" => Serial => OK
"Setup" => "Weatherlink network" => fill in your DID and key and save the settings
then
"Setup" => "communications port" => "TCP/IP" => "Remote IP address" and the IP and port number should be still there
I tried multiple times, this works for sure.
But my WLfW has multiple uploads to do, so "Setup:Network Upload (on if checked)" is always checked.
I will get a brand new DeviceID and KEY this weekend, install another WLfW and will test it step by step making screenshots.
The problem is that i have only one console/logger.
Wim