Odd errors in MB log

Weather Software > Meteohub/Meteobridge

(1/2) > >>

Big Sky Weather:
Does anyone have any idea what all of this means? It is just repeated over and over in the log. The device would appear to be working fine, otherwise.

wnetd (29.01.2020 19:47:42): process received signal (11) and terminated: sendloop_LOOP_C < add_wnet* < add_wnet < add_wnet* < add_wnet < add_wnet* < add_wnet < sendloo
logger (29.01.2020 19:47:45): open named pipe "/dev/meteobridge" failed: No such device or address
logger (29.01.2020 19:51:36): message above repeats 105 times.
test5m (30.01.2020 02:51:40): weathernet daemon stalled, will be restarted now.
wnetd (29.01.2020 19:51:40): process started.
logger (29.01.2020 19:51:40): open named pipe "/dev/meteobridge" failed: No such device or address
wnetd (29.01.2020 20:02:48): process received signal (11) and terminated: sendloop_LOOP_C < add_wnet* < add_wnet < sendloop_LOOP_B < sendloop_LOOP_A < wnet_handle* < ap
logger (29.01.2020 20:02:52): open named pipe "/dev/meteobridge" failed: No such device or address
logger (29.01.2020 20:06:32): message above repeats 93 times.
test5m (30.01.2020 03:06:34): weathernet daemon stalled, will be restarted now.
wnetd (29.01.2020 20:06:34): process started.

Info:
Platform:   TL-MR3020 (no USB hub)
RAM:   29364 kB total, 3092 kB free (89% used)
SW Version:   Meteobridge 4.2 (Jan 12 2020, build 13326), FW 1.4
Uptime:   12 days, 9 hours, 18 minutes Buffer: 7 items (1%)

docbee:
Please update to most recent version and report if these crashes of the logger still happen.

Big Sky Weather:

--- Quote from: docbee on February 02, 2020, 12:01:58 PM ---Please update to most recent version and report if these crashes of the logger still happen.

--- End quote ---

I'll do it later today and report back.

Big Sky Weather:
So after rebooting to update to the latest firmware, here's the full log:

wnetd (03.02.2020 16:34:14): process started.
system (03.02.2020 16:34:14): start of logging process initiated.
wnetd (03.02.2020 16:34:14): send data thread started (pid:2303 tid:2305)
logger (03.02.2020 16:34:15): historical data loaded (34 records).
logger (03.02.2020 16:34:15): data logger (version 5.1c, build 13361) started.
logger (03.02.2020 16:34:17): connect station 0 (GW1000 via TCP/IP).
logger (03.02.2020 16:34:20): sensors are now providing data.
logger (03.02.2020 16:34:20): services started.
wnetd (03.02.2020 16:49:29): process received signal (11) and terminated: sendloop_LOOP_C < sendloop_LOOP_B < sendloop_LOOP_A < wnet_handle* < appendlog < wnet_handle <
logger (03.02.2020 16:49:30): open named pipe "/dev/meteobridge" failed: No such device or address
logger (03.02.2020 16:51:33): message above repeats 57 times.
test5m (03.02.2020 23:51:33): weathernet daemon stalled, will be restarted now.
wnetd (03.02.2020 16:51:33): process started.
wnetd (03.02.2020 16:51:33): send data thread started (pid:4634 tid:4636)
wnetd (03.02.2020 17:04:31): process received signal (11) and terminated: sendloop_LOOP_C < sendloop_LOOP_B < sendloop_LOOP_A < wnet_handle* < appendlog < wnet_handle <
logger (03.02.2020 17:04:33): open named pipe "/dev/meteobridge" failed: No such device or address
logger (03.02.2020 17:05:51): message above repeats 33 times.
test5m (04.02.2020 00:05:56): weathernet daemon stalled, will be restarted now.
wnetd (03.02.2020 17:05:56): process started.
wnetd (03.02.2020 17:05:56): send data thread started (pid:6039 tid:6041)

Platform:   TL-MR3020 (no USB hub)
RAM:   29364 kB total, 2416 kB free (91% used)
SW Version:   Meteobridge 4.3 (Feb 1 2020, build 13361), FW 1.4
Uptime:   0 hours, 37 minutes Buffer: 3 items (0%)

As a side note, ever since I got the MB connected to a GW1000 and configured months ago, I've never been able to get back into the "Weather Station" page. When I click on the tab, it gives the following error:

The CGI process did not produce any response

Navigation

[0] Message Index

[#] Next page

Go to full version