Author Topic: Weather34 template(non meteobridge versions) (Read 70992 times)

weather34 · « **Reply #625 on:** September 08, 2018, 03:40:23 PM »

ok i just added all your weatherflow ID into my local demo using chrome no issues in saving files . i can honestly say 90% of issues apart from my own css mistakes are local run servers.the template is developed on a local server using XAMPP currently PHP 7.2.9 .so i dont know it is very hard to diagnose without some accessible url .

screensot below is using your current data with your weatherflow credentials added in chrome Version Version 69.0.3497.81 (Official Build) (64-bit).. brian

tcichowicz · « **Reply #626 on:** September 08, 2018, 05:43:19 PM »

Quote from: weather34 on September 08, 2018, 03:40:23 PM

ok i just added all your weatherflow ID into my local demo using chrome no issues in saving files . i can honestly say 90% of issues apart from my own css mistakes are local run servers.the template is developed on a local server using XAMPP currently PHP 7.2.9 .so i dont know it is very hard to diagnose without some accessible url .

screensot below is using your current data with your weatherflow credentials added in chrome Version Version 69.0.3497.81 (Official Build) (64-bit).. brian

Well I'm currently using my Synology NAS as my server. Never run it before. I'll see if I can poke a hole in my router for external access ...

Thanks - that's mine I recognize my battery voltages...

Sent from my iPhone using Tapatalk

Ryan · « **Reply #627 on:** September 29, 2018, 02:27:05 PM »

https://www.njacobmillerwx.com

Everything but the graphs with data pulled from Wunderground stopped updating on the 24th. It also looks like like of the APIs that it pulls from stopped updating on the same fate. My station is reporting fine to Wunderground. I have tried restarting the Digital Oceans Droplet that the site is hosted on. All the settings in easyweathersetup.php don't appear to have changed and look correct.

Suggestions?

Ryan · « **Reply #628 on:** September 29, 2018, 02:58:11 PM »

I think I found the issue. No idea how to fix it though... The SSL cert that I have from my registrar is still valid. So I'm not sure what changed.

I have tried changing the IP to the url of my site but it still doesn't work.

Forever · « **Reply #629 on:** September 30, 2018, 11:33:52 AM »

It looks like Brian pulled versions again.

Anyone have the latest Weather Display and Weather Flow versions?

Jáchym · « **Reply #630 on:** September 30, 2018, 11:57:35 AM »

I just cannot stop laughing... sorry... its just unbelievable... how many times did he do this in the 3yr history of his template? Give it a few weeks...

Yes I also have much less time now, but I dont delete stuff and dont grouch about it all the time

taylormia · « **Reply #631 on:** October 08, 2018, 09:29:53 PM »

If anyone is interested in the weeWX adapted version of the weather34 template, you can find it at the link below courtesy of Ian Steeple. All support questions on this adapted version should be directed to Ian and not to Brian.

https://github.com/steepleian/weather34-Home-Weatherstation-Template-WeeWX-adapted

Here is my web site (https://weather.sathy.us) using this template. The additional benefit of this adapted template is the capability to display CanvasJS charts generated from native weeWX historical reports rather than a feed from the free Weather Underground API , which as many of you know is going away shortly.

taylormia · « **Reply #632 on:** October 16, 2018, 10:36:51 AM »

At the link below is a general guide on integrating weeWX weather software with the weather34 web template adapted for weeWX by Ian Steeple. In this example, the weeWX server and the web server are on separate systems. Download the guide to use the embedded web links.

https://github.com/steepleian/weather34-Home-Weatherstation-Template-WeeWX-adapted/blob/master/taylormia_remote_server_setup.pdf

Giggino · « **Reply #633 on:** October 22, 2018, 09:36:52 AM »

Hello, I downloaded this template at the following address: https://www.linksysinfo.org/weather34/CU.zip (last version for Cumulus), I then uploaded all the files to the following web address: http: //lastazionedelporto.altervista.org. I do not have the Meteobridge and I'm trying to publish my weather station data using only Cumulus. I did not understand what other files I need to upload to my site's directory to allow Cumulus to update the data (realtime.txt? .. or something else?). Can anyone help me? Thank you.

taylormia · « **Reply #634 on:** October 22, 2018, 10:26:04 AM »

My experience is with weeWX on Linux - not Cumulus. But, both the Cumulus and weeWX templates use the realtime.txt file. So, you have to make the realtime.txt file available to the template and specify that location as a file path or URL in the easyweathersetup configuration page (see below). How you make the realtime.txt file available to the template depends on your setup. In my write up I show how to mount the directory containing the realtime.txt file on the webserver using NFS.

PaulMy · « **Reply #635 on:** October 22, 2018, 10:42:21 AM »

My settings for Cumulus realtime.txt is ../weather/realtime.txt where both /weather and the HomeWeather /pws folders are in my public_html/ root.
www.komokaweather.com/pws

Enjoy,
Paul

Giggino · « **Reply #636 on:** October 22, 2018, 11:16:41 AM »

Thanks to both for the answers, after putting a file that I called realtime.txt in the public directory of the site, in my web page are shown the data sent by Cumulus but disappears all the graphics of the template, the home page is shown me only a blank page with the data sent by Cumulus listed.
For Paolo: in the template I downloaded, there is no folder called 'weather' or 'home weather', while there is a folder called 'demodata' in which there is already a file called realtime.txt. I uploaded all the template files in my public_html / root but I did not create a PWS folder because I thought it was only necessary for those using a 'Meteobridge' device.

nitrx · « **Reply #637 on:** October 22, 2018, 11:50:46 AM »

Quote from: Giggino on October 22, 2018, 11:16:41 AM

Thanks to both for the answers, after putting a file that I called realtime.txt in the public directory of the site, in my web page are shown the data sent by Cumulus but disappears all the graphics of the template, the home page is shown me only a blank page with the data sent by Cumulus listed.
For Paolo: in the template I downloaded, there is no folder called 'weather' or 'home weather', while there is a folder called 'demodata' in which there is already a file called realtime.txt. I uploaded all the template files in my public_html / root but I did not create a PWS folder because I thought it was only necessary for those using a 'Meteobridge' device.

You must create a separate directory ( by expample /pws ) in the eayweathersetup you can use the fullpath to reatime.txt by example http://yourdomain.com/reatime.txt I see you have a freehost most of them dont alllow ftp-ing .txt files are you sure your realtime.txt is up to date (I couldnt find a realtime.txt file on your domain http://lastazionedelporto.altervista.org/realtime.txt gives a 404 error not found

Giggino · « **Reply #638 on:** October 22, 2018, 12:03:44 PM »

Thanks Nitrx, what do you mean by separate directory? In my public directory there are no other files besides the template, do I still have to create a PWS folder in which to include all the template files? What do you mean by realtime.txt file updated? Cumulus updates it regularly and I can see the new data updated every minute but at the address http://lastazionedelporto.altervista.org I see them listed on a blank page, if instead I go to http://lastazionedelporto.altervista.org/index.php correctly display the template page with the updated data. The file realtime.txt I put in the folder demodata because in that position there was already one with test data, I deleted that and I created a new file realtime.txt in the same position.

PaulMy · « **Reply #639 on:** October 22, 2018, 12:10:11 PM »

If http://lastazionedelporto.altervista.org/demodata/realtime.txt is your live realtime.txt updated by Cumulus then in the HomeWeather settings use the path of ../demodata/realtime.txt

Enjoy,
Paul

Giggino · « **Reply #640 on:** October 22, 2018, 12:22:39 PM »

Thanks Paul, the path inserted in HomeWeather is correct but I can correctly view the web page with the template and the updated data only at http://lastazionedelporto.altervista.org/index.php if I do not write also /index.php in the address bar of the browser I get out a blank page with the list of data transmitted by Cumulus! ... does not seem a normal thing.

PaulMy · « **Reply #641 on:** October 22, 2018, 12:30:27 PM »

Yes, I noticed that the standard Cumulus index.htm shows. If you don't need index file for any other purpose then delete index.htm so only have index.php and it should start with just http://lastazionedelporto.altervista.org
You may need to turn off uploading of Cumulus standard template files to avoid it showing up again and taking priority over index.php
.
Enjoy,
Paul

Giggino · « **Reply #642 on:** October 22, 2018, 12:40:41 PM »

I did as you said .... perfectly solved problem! Thank you so much .... now I have to fix two little things, the forecast section and current conditions are always offline, in the template settings I provided the required API keys ... but today has always been offline.
Then in the template settings it is allowed to vary the information provided in the two small panels at the top, this works but the title of the box remains the same, so it is not appropriate with respect to the information present.

PaulMy · « **Reply #643 on:** October 22, 2018, 01:02:16 PM »

It is a while since I last did a new setup. I think it can take a while (more than a few minutes) for the current and forecast to show. I see sometimes mine is missing and either with a page refresh or wait a while it comes back. I presume you have the API correct for WU, Darksky and checkWX

On the top items, make sure the Position item and the Position Title match. You can add others as options listed below in the settings, and you can edit the Position title to your liking.

Enjoy,
Paul

Giggino · « **Reply #644 on:** October 22, 2018, 01:39:21 PM »

I corrected the articles at the top, for the forecasts I got the API of Darksky and checkWX, but from this morning never worked, I think there is some problem, I will record the station also on WU, so Cumulus can send the data there, I still another problem with charts that are not drawn

PaulMy · « **Reply #645 on:** October 22, 2018, 04:12:05 PM »

It may have changed, but WU was needed for the charts historical data. I have a couple of older versions (tests) that used MySQL database data for charts so WU then not needed.

Enjoy,
Paul

Giggino · « **Reply #646 on:** October 23, 2018, 02:55:44 PM »

My station from this morning is online on WU, but the graphs in the HomeWeatherStation template do not appear yet, the Darksky and checkWX predictions do not work yet.

PaulMy · « **Reply #647 on:** October 23, 2018, 03:16:26 PM »

For the charts, possibly you could use another WU ID for testing and see if the charts then show up
.[color=rgba(236, 87, 27, 1.000)] options [/color] STATION ID for PWS Historical Charts enter your weather underground station id example in capitals ISTANBUL161

Giggino · « **Reply #648 on:** October 23, 2018, 04:02:47 PM »

Great idea ... I'll try

Giggino · « **Reply #649 on:** October 28, 2018, 11:42:27 AM »

I still can not see the forecasts (Darksky and checkWX do not work) and the graphics do not work (I also tried with another WU account), I was thinking of making a new file upload and a new setup

News:

Author Topic: Weather34 template(non meteobridge versions) (Read 70992 times)